Publications

  • Francis, Nicola L., et al. “An ice‐templated, linearly aligned chitosan‐alginate scaffold for neural tissue engineering.” Journal of Biomedical Materials Research Part A (2013)
  • .Klinzing, Gerard, and Antonios Zavaliangos. “Understanding the Effect of Environmental History on Bilayer Tablet Interfacial Shear Strength.” Pharmaceutical Research (2013): 1-11.
  • Massey C.J., van Donkelaar C.C., Vresilovic E., Zavaliangos A., Marcolongo M., “Effects of aging and degeneration on the human intervertebral disc during the diurnal cycle: A finite element study”, Journal of Orthopaedic Research, Volume 30, Issue 1, pages 122–128, January 2012
  • Zhang J.; Zavaliangos A., “Discrete Finite-Element Simulation of Thermoelectric Phenomena in Spark Plasma Sintering”, Journal of Electronic Materials, 40,  5, 2011, pp.  873-878.
  • Klinzing, G., Zavaliangos, A, et al. (2010) Temperature and density evolution during compaction of a capsule shaped tablet, Computers & Chemical Engineering 34, 1082-1091.
  • Cunningham, J., Winstead, D., and Zavaliangos, A. (2010) Understanding Variation in Roller Compaction through Finite Element-based Process Modeling, Computers & Chemical Engineering 34, 1058-1071.
  • Zavaliangos A, Galen S, Cunningham J, et al.  (2008)  Temperature evolution during compaction of pharaceutical powders, Journal of Pharmaceutical Sciences, 97(8), 3291-3304.
  • McWilliams B, Zavaliangos A. (2008) Multi-phenomena simulation of electric field assisted sintering, Journal of Materials Science, 43(14), 5031-5035.
  • Nowicke F, Zavaliangos A, Rogers HC. (2006) The effect of roll and clad sheet geometry on the necking instability during rolling of clad sheet metals, International Journal of Mechanical Sciences, 48(8), 868-877.
  • Zavaliangos A, Missiaen JM, Bouvard D. (2006) Anisotropy in shrinkage during sintering, Science of Sintering, 38(1), 13-25.
  • McWilliams B, Zavaliangos A, Cho KC, et al. (2006) The modeling of electri-current-assisted sintering to produce bulk nanocrystalline tungsten, JOM, 58(4), 67-71.
  • Galen S, Zavaliangos A. (2005) Strength anisotropy in cold compacted ductile and brittle powders, Acta Materialia, 53(18), 4801-4815.
  • Procopio AT, Zavaliangos A. (2005)  Simulation of multi-axial compaction of granular media from loose to high relative densities, Journal of the Mechanics and Physics of Solids, 53(7), 1523-1551.
  • Barsoum MW, Hoffman EN, Doherty RD, Gupta S, Zavaliangos A. (2004) Driving force and mechanism for spontaneous metal whisker formation, Physical Review Letters, 93(20), 206104.
  • Zavaliangos A, Zhang J, Krammer M, et al. (2004) Temperature evolution during field activated sintering, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 379(1-2), 218-228.
  • Cunningham JC, Sinka IC, Zavaliangos A. (2004) Analysis of tablet compaction. I. Characterization of mechanical behavior of powder and powder/tooling friction,�Journal of Pharmaceutical Sciences, 93(8), 2022-2039.
  • Sinka IC, Cunningham JC, Zavaliangos A. (2004) Analysis of tablet compaction. II. Finite element analysis of density distributions in convex tablets, Journal of Pharmaceutical Sciences, 93(8), 2040-2053.
  • Procopio AT, Zavaliangos A, Cunningham JC. (2003) Analysis of the diametrical compression test and the applicability to plastically deforming materials, Journal of Materials Science, 38(17), 3629-3639.
  • Sinka IC, Cunningham JC, Zavaliangos A.  (2003) The effect of wall friction in the compaction of pharmaceutical tablets with curved faces: a validation study of the Drucker-Prager Cap model, Powder Technology, 133, 33-43.
  • Zavaliangos, A. (2003) A numerical study of the development of tensile principal stresses during die compaction, Particulate Science and Technology, 21(2), 105-115.
  • Dec RT, Zavaliangos A, Cunningham JC. (2003) Comparision of various modeling methods for analysis of powder compaction in roller press, Powder Technology, 130, 265-271.
  • Zavaliangos, A. (2002) Constitutive models for the simulation of P/M processes, International Journal of Powder Metallurgy, 38(2), 27-39.
  • Zavaliangos A, Bouvard D. (2001) Anisotropy in sintering- Author’s reply, International Journal of Powder Metallurgy, 37(4), 6-7.
  • Zavaliangos A, Bouvard D. (2000) Numerical simulation of anisotropy in sintering due to prior compaction, Journal of Materials Science, 36(7), 58-65.
  • Tzimas E, Zavaliangos A. (2000) Evaluation of volume fraction of solid in alloys formed by semisolid processing, Journal of Materials Science, 35(21), 5319-5329.
  • Zavaliangos A, Laptev A. (2000) The densification of powder mixtures containing soft and hard componenets under static and cyclic pressure, Acta Meterialia, 48(10), 2565-2570.
  • Zavaliangos A, Tzimas E. (2000) On the approximation of the partial areas method in the calculation of the fraction of solid, Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 31(4), 877-879.
  • Tzimas E, Zavaliangos A. (2000) A comparative characterization of near-equiaxed microstructures as produced by spray casting, magnetohydrodynamic casting and the stress induced, melt activated process, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 289, 217-227.
  • Tzimas E, Zavaliangos A. (2000)  Evolution of near-equiaxed microstructure in the semisolid state, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 289, 228-240.
  • Jovicic J, Zavaliangos A, Ko F. (2000) Modeling of the ballistic behavior of gradient design composite armors, Composites Part A-Applied Science and Manufacturing, 31(8), 773-784.
  • Groza JR, Zavaliangos A. (2000) Sintering activation by external electrical field, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 287, 171-177.
  • El-Raghy T, Barsoum MW, Zavaliangos A, et al. (1999) Processing and mechanical properties of Ti3SiC2: II, effect of grain size and deformation temperature, Journal of the American Ceramic Society, 82(10), 2855-2860.
  • Brodkin D, Zavaliangos A, Kalidindi SR, et al. (1999) Ambient- and high-temperature properties of titanium carbide titanium boride composites fabricated by transient plastic phase processing, Journal of the American Ceramic Society, 82(3), 665-672.
  • Tzimas E, Zavaliangos A. (1999) Materials selection for semisolid processing, Materials and Manufacturing Processes, 14(2), 217-230.
  • Tzimas E, Zavaliangos A. (1999) Mechanical behavior of alloys with equiaxed microstructure in the semisolid state at high solid content, Acta Materialia, 47(2), 517-528.
  • Zavaliangos, A. (1998) Modeling of the mechanical behavior of semisolid metallic alloys at high volume fractions of solid, International Journal of Mechanical Sciences, 40(10), 1029-1041.
  • Farber L, Barsoum MW, Zavaliangos A, et al. (1998) Dislocations and stacking faults in Ti3SiC2, Journal of the American Ceramic Society, 81(6), 1677-1681.
  • El-Raghy T, Zavaliangos A, Barsoum MW, et al. (1997) Damage mechanisms around hardness indentations in Ti3SiC2, Journal of the American Ceramic Society, 80(2), 513-516.
  • Brodkin D, Kalidindi SR, Barsoum MW, Zavaliangos A. (1996) Microstructural evolution during transient plastic phase processing of titanium carbide-titanium boride composites, Journal of the American Ceramic Society, 79(7), 1945-1952.
  • Barsoum M, Zavaliangos A, Kalidindi SR, et al. (1995) The transient plastic phase processing of ceramic-ceramic composites, JOM-Journal of the Minerals Metals & Meterials Society, 47(11), 52-55.
  • Zavaliangos A, Lawley A. (1995) Numerical-simulation of Thixoforming, Journal of Materials Engineering and Performance, 4, 40-47.
  • Zavaliangos A, Anand L. (1993) Thermo-elasto-viscoplasticity of isotropic porous metals, Journal of the Mechanics and Physics of Solids, 41(6), 1087-1118.
  • Zavaliangos A, Anand L. (1992) Thermal aspects of shear localization in microporous viscoplastic solids, International Journal for Numerical Methods in Engineering, 33(3), 595-634.
  • Weber GG, Lush AM, Zavaliangos A, et al. (1990) An objective time-integration procedure for isotropic rate-independent and rate-dependent elastic plastic constitutive-equations, International Journal of Plasticity, 6, 701-744.