Publications

Conferences

1. Can Sitik, Weicheng Liu, Baris Taskin and Emre Salman, "Low Voltage Clock Tree Synthesis with Local Gate Clusters," Proceedings of the ACM Great Lakes Symposium on Very Large Scale Integration (GLSVLSI), May 2019.
2. Ragh Kuttappa, Scott Lerner, Leo Filippini, and Baris Taskin, "Low Swing -- Low Frequency Rotary Traveling Wave Oscillators", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2019.
3. Scott Lerner and Baris Taskin, "Towards Design Decisions for Genetic Algorithms in Clock Tree Synthesis", Proceedings of the IEEE International Green and Sustainable Computing Conference (IGSC), October 2018.
4. Oday Bshara, Yuqiao Liu, Ibrahim Tekin, Baris Taskin, and Kapil R. Dandekar, "mmWave Antenna Gain Switching to Mitigate Indoor Blockage", Proceedings of the IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS-URSI), July 2018. PAPER
5. Vasil Pano, Scott Lerner, Isikcan Yilmaz, Michael Lui, and Baris Taskin, "Workload-Aware Routing (WAR) for Network-on-Chip Lifetime Improvement," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2018. PAPER
6. Scott Lerner, Vasil Pano, and Baris Taskin, “NoC Router Lifetime Improvement using Per-Port Router Utilization,” Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2018. PAPER
7. Ragh Kuttappa and Baris Taskin, "Low Frequency Rotary Traveling Wave Oscillators", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2018, pp. 1--5. PAPER
8. Leo Filippini and Baris Taskin, “A 900 MHz Charge Recovery Comparator with 40 fJ Per Conversion,” Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2018. PAPER
9. Michael Lui, Karthik Sangaiah, Mark Hempstead, and Baris Taskin, "Towards Cross-Framework Workload Analysis via Flexible Event-Driven Interfaces", IEEE International Symposium on Performance Analysis of Systems and Software (ISPASS), April 2018. PAPER
10. Leo Filippini, Lunal Khuon, and Baris Taskin, "Charge Recovery Implementation of an Analog Comparator: Initial Results," in Proceedings of the IEEE International Midwest Symposium on Circuits and Systems (MWSCAS), Aug. 2017, pp. 1505--1508. PAPER
11. Vasil Pano, Yuqiao Liu, Isikcan Yilmaz, Ankit More, Baris Taskin and Kapil Dandekar, "Wireless NoCs using Directional and Substrate Propagation Antennas", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2017, pp. 188--193. PAPER
12. Scott Lerner and Baris Taskin, "WT-CTS: Incremental Delay Balancing Using Parallel Wiring Type For CTS", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2017, pp. 465--470. PAPER
13. Leo Filippini and Baris Taskin, "A Charge Recovery Logic System Bus", Proceedings of the IEEE International Workshop on System Level Interconnect Prediction (SLIP), June 2017. PAPER
14. Scott Lerner, Eric Leggett and Baris Taskin, "Slew-Down: Analysis of Slew Relaxation for Low-Impact Clock Buffers", Proceedings of the IEEE International Workshop on System Level Interconnect Prediction (SLIP), June 2017. PAPER
15. Ragh Kuttappa, Leo Filippini, Scott Lerner and Baris Taskin, "Stability of Rotary Traveling Wave Oscillators Under Process Variations and NBTI", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2017, pp. 1--4. PAPER
16. Ragh Kuttappa, Lunal Khuon, Bahram Nabet and Baris Taskin, "Reconfigurable Threshold Logic Gates using Optoelectronic Capacitors", Proceedings of the Design, Automation and Test in Europe (DATE), March 2017, pp. 614--617. PAPER
17. Scott Lerner and Baris Taskin, "Workload-Aware ASIC Flow for Lifetime Improvement of Multi-core IoT Processors", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2017, pp. 379--384. PAPER
18. Leo Filippini, Diane Lim, Lunal Khuon and Baris Taskin, "Wireless Charge Recovery System for Implanted Electroencephalography Applications in Mice", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2017, pp. 342--345. PAPER
19. Vasil Pano, Isikcan Yilmaz, Ankit More and Baris Taskin, "Energy Aware Routing of Multi-Level Network-on-Chip Traffic," Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2016, pp. 480--486. PAPER
20. Vasil Pano, Isikcan Yilmaz, Yuqiao Liu, Baris Taskin and Kapil Dandekar, "Wireless Network-on-Chip Analysis of Propagation Technique for On-chip Communication," Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2016, pp. 400--403. PAPER
21. Leo Filippini and Baris Taskin, "Charge Recovery Logic for Thermal Harvesting Applications", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2016, pp. 542--545. PAPER
22. Weicheng Liu, Emre Salman, Can Sitik and Baris Taskin, "Exploiting Useful Skew in Gated Low Voltage Clock Trees for High Performance," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2016, pp. 259--2598. PAPER
23. Karthik Sangaiah, Mark Hempstead and Baris Taskin, "Uncore RPD: Rapid Design Space Exploration of the Uncore via Regression Modeling", Proceedings of IEEE/ACM International Conference on Computer-Aided Design (ICCAD), November 2015, pp. 365--372. PAPER
24. Leo Filippini, Emre Salman, Baris Taskin, "A Wirelessly Powered System with Charge Recovery Logic", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2015, pp. 505--510. PAPER
25. Weicheng Liu, Emre Salman, Can Sitik, Baris Taskin, Savithri Sundareswaran and Benjamin Huang, "Circuits and Algorithms to Facilitate Low Swing Clocking in Nanoscale Technologies", to appear in the Proceedings of Semiconductor Research Corporation (SRC) TECHCON, September 2015. PAPER
26. Mallika Rathore, Emre Salman, Can Sitik and Baris Taskin, "A Novel Static D Flip-Flop Topology for Low Swing Clocking", Proceedings of ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2015, pp. 301--306. PAPER
27. Weicheng Liu, Emre Salman, Can Sitik and Baris Taskin, "Clock Skew Scheduling in the Presence of Heavily Gated Clock Networks", Proceedings of ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2015, pp. 283--288. PAPER
28. Weicheng Liu, Emre Salman, Can Sitik and Baris Taskin, "Enhanced Level Shifter for Multi-Voltage Operation,” Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2015, pp.1442--1445. PAPER
29. Yuqiao Liu, Vasil Pano, Damiano Patron, Kapil Dandekar and Baris Taskin, "Innovative Propagation Mechanism for Inter-chip and Intra-chip Communication,” Proceedings of the IEEE Wireless and Microwave Technology Conference (WAMICON), April 2015, pp. 1--6. PAPER
30. 
    Siddharth Nilakantan, Karthik Sangaiah, Ankit More, Giordano Salvador, Baris Taskin, Mark Hempstead, ” SynchroTrace: Synchronization-aware Architecture-agnostic Traces for Light-Weight Multi-core Simulation”, Proceedings of the IEEE International Symposium on Performance Analysis of Systems and Software (ISPASS 2015), March 2015, pp. 278--287. PAPER
31. Giordano Salvador, Siddharth Nilakantan, Baris Taskin, Mark Hempstead and Ankit More, "Effects of Nondeterminism in Hardware and Software Simulation with Thread Mapping", Proceedings of the IEEE/ACM International Conference on VLSI Design (VLSID), January 2015, pp. 129--134. PAPER
32. Siddharth Nilakantan, Scott Lerner, Mark Hempstead and Baris Taskin, "Can you trust your memory trace?: A comparison of memory traces from binary instrumentation and simulation", Proceedings of the IEEE/ACM International Conference on VLSI Design (VLSID), January 2015, pp. 135--140. PAPER
33. Ying Teng and Baris Taskin, "Frequency-Centric Resonant Rotary Clock Distribution Network Design", Proceedings of the IEEE/ACM International Conference on Computer-Aided Design (ICCAD), November 2014, pp. 742--749. PAPER
34. Can Sitik, Scott Lerner and Baris Taskin, "Timing Characterization of Clock Buffers for Clock Tree Synthesis", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2014, pp. 230--236. PAPER
35. Giordano Salvador, Siddharth Nilakantan, Ankit More, Baris Taskin and Mark Hempstead "Static Thread Mapping for NoC CMPs via Binary Instrumentation Traces", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2014, pp. 517--520. PAPER
36. Can Sitik, Leo Filippini, Emre Salman and Baris Taskin, "High Performance Low Swing Clock Tree Synthesis with Custom D Flip-Flop Design", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2014, pp. 498--503. PAPER
37. Julian Kemmerer and Baris Taskin, "Range-based Dynamic Routing of Hierarchical On Chip Network Traffic", Proceedings of the IEEE International Workshop on System Level Interconnect Prediction (SLIP)", June 2014, pp. 1-9. PAPER
38. Ying Teng and Baris Taskin, "Resonant Frequency Divider Design Methodology for Dynamic Frequency Scaling", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2013, pp. 479--482. PAPER
39. Can Sitik, Prawat Nagvajara and Baris Taskin, "A Microcontroller-Based Embedded System Design Course with PSoC3", Proceedings of the IEEE International Conference on Microelectronic Systems Education (MSE), June 2013, pp. 28--31. PAPER
40. Can Sitik and Baris Taskin, "Multi-Corner Multi-Voltage Domain Clock Mesh Design", Proceedings of the ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2013, pp. 209--214. PAPER
41. Can Sitik and Baris Taskin, "Skew-Bounded Low Swing Clock Tree Optimization", Proceedings of the ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2013, pp. 49--54. Best Paper Nominee. PAPER
42. Ying Teng and Baris Taskin, "Rotary Traveling Wave Oscillator Frequency Division at Nanoscale Technologies", Proceedings of ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2013, pp. 349--350. PAPER
43. Can Sitik and Baris Taskin, "Implementation of Domain-Specific Clock Meshes for Multi-Voltage SoCs with IC Compiler", Proceedings of Synopsys User Group Conference Silicon Valley (SNUG), March 2013.
44. Ying Teng and Baris Taskin, "Sparse-Rotary Oscillator Array (SROA) Design for Power and Skew Reduction", Proceedings of the Design, Automation and Test in Europe (DATE), March 2013, pp. 1229--1234. PAPER
45. Jianchao Lu, Xiaomi Mao and Baris Taskin, "Clock Mesh Synthesis with Gated Local Trees and Activity Driven Register Clustering", Proceedings of the IEEE/ACM International Conference on Computer-Aided Design (ICCAD), November 2012, pp. 691--697. PAPER
46. Matthew Guthaus and Baris Taskin, "High-Performance, Low-Power Resonant Clocking: Embedded tutorial", Proceedings of the IEEE/ACM International Conference on Computer-Aided Design (ICCAD), November 2012, pp. 742--745. PAPER
47. Can Sitik and Baris Taskin, "Multi-Voltage Domain Clock Mesh Design", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2012, pp. 201--206. PAPER
48. Ying Teng and Baris Taskin, "Clock Mesh Synthesis Method using Earth Mover's Distance under Transformations", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2012, pp. 121--126. PAPER
49. Ying Teng and Baris Taskin, "Synchronization Scheme for Brick-Based Rotary Oscillator Arrays", Proceedings of the ACM Great Lakes Symposium on VLSI (GLSVLSI), May 2012, pp. 117--122. PAPER
50. Ankit More and Baris Taskin, "A Unified Design Methodology for a Hybrid Wireless 2-D NoC", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2012, pp. 640--643. PAPER
51. Vinayak Honkote, Ankit More and Baris Taskin, "3-D Parasitic Modeling for Rotary Interconnects", Proceedings of the International Conference on VLSI Design (VLSID), January 2012, pp. 137--142. PAPER
52. Ankit More and Baris Taskin, "EM and Circuit Co-simulation of a Reconfigurable Hybrid Wireless NoC on 2D ICs", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2011, pp. 19-24. PAPER
53. Ying Teng, Jianchao Lu and Baris Taskin, "ROA-Brick Topology for Rotary Resonant Clocks", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2011, pp. 273--278. PAPER
54. Ankit More and Baris Taskin, "Simulation Based Study of On-chip Antennas for a Reconfigurable Hybrid 2D Wireless NoC", Proceedings of the IEEE International Workshop on System Level Interconnect Prediction (SLIP), June 2011. PAPER
55. Jianchao Lu and Baris Taskin, "From RTL to GDSII: An ASIC Design Course Development using Synopsys University Program", Proceedings of the IEEE International Conference on Microelectronic Systems Education (MSE), June 2011, pp. 72--75. PAPER
56. Jianchao Lu, Yusuf Aksehir and Baris Taskin, "Register On MEsh (ROME): A Novel Approach for Clock Mesh Network Synthesis", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2011, pp. 1219--1222. PAPER
57. Jianchao Lu and Baris Taskin, "Reconfigurable Clock Polarity Assignment for Peak Current Reduction of Clock-gated Circuits", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2011, pp 1940--1943. PAPER
58. Ying Teng and Baris Taskin, "Process Variation Sensitivity of the Rotary Traveling Wave Oscillator", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2011, pp. 236--242. PAPER
59. Jianchao Lu, Xiaomi Mao and Baris Taskin, "Timing Slack Aware Incremental Register Placement with Non-uniform Grid Generation for Clock Mesh Synthesis", Proceedings of the ACM International Symposium on Physical Design (ISPD), March 2011, pp. 131--138. PAPER
60. Jianchao Lu, Vinayak Honkote, Xin Chen and Baris Taskin, "Steiner Tree Based Rotary Clock Routing with Bounded Skew and Capacitive Load Balancing", Proceedings of the Design, Automation and Test in Europe (DATE), March 2011, pp. 455--460. PAPER
61. Vinayak Honkote and Baris Taskin, "Skew-Aware Capacitive Load Balancing for Low-Power Zero Clock Skew Rotary Oscillatory Array", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2010, pp. 209--214. PAPER
62. Ankit More and Baris Taskin, "Wireless Interconnects for Inter-tier Communication on 3-D ICs", Proceedings of the European Microwave Integrated Circuits Conference (EuMIC), September 2010, pp. 105--108. PAPER
63. Ankit More and Baris Taskin, "Simulation Based Study of On-chip Antennas for a Reconfigurable Hybrid 3D Wireless NoC", Proceedings of the IEEE International SoC Conference (SOCC), September 2010, pp. 447--452. PAPER
64. Ankit More and Baris Taskin, "Effect of EMI between Wireless Interconnects and Metal Interconnects on CMOS Digital Circuits", Proceedings of the Mediterranean Microwave Symposium (MMS), August 2010. PAPER
65. Vinayak Honkote and Baris Taskin, "PEEC Based Parasitic Modeling for Power Analysis on Custom Rotary Rings", Proceedings of the ACM/IEEE International Symposium on Low Power Electronics and Design (ISLPED), August 2010, pp. 111--116. PAPER
66. Ankit More and Baris Taskin, "Electromagnetic Compatibility of CMOS On-chip Antennas", Proceedings of the IEEE AP-S International Symposium on Antennas and Propagation, July 2010, pp. 1--4. PAPER
67. Ankit More and Baris Taskin, "Simulation Based Feasibility Study of Wireless RF Interconnects for 3D ICs", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2010, pp. 228-231. PAPER
68. Jianchao Lu and Baris Taskin, "Clock Tree Synthesis with XOR Gates for Polarity Assignment", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2010, pp.17-22. PAPER
69. Vinayak Honkote and Baris Taskin, "Design Automation and Analysis of Resonant Rotary Clocking Technology", Proceedings of the IEEE Computer Society Annual Symposium on VLSI (ISVLSI), July 2010, pp. 471--472. PAPER
70. Ankit More and Baris Taskin, "Simulation Based Study of Wireless RF Interconnects for Practical CMOS Implementation", Proceedings of the System Level Interconnect Prediction (SLIP), June 2010, pp. 35--41. PAPER
71. Ankit More and Baris Taskin, "Electromagnetic Interaction of On-Chip Antennas and CMOS Metal Layers for Wireless IC Interconnects", Proceedings of the IEEE/ACM Great Lakes Symposium on VLSI Design (GLSVLSI), May 2010, pp. 413-416. PAPER
72. Ankit More and Baris Taskin, "Leakage Current Analysis for Intra-Chip Wireless Interconnects", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2010, pp. 49--53. PAPER
73. Jianchao Lu and Baris Taskin, "Clock Buffer Polarity Assignment Considering Capacitive Load", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2010, pp. 765--770. PAPER
74. Vinayak Honkote and Baris Taskin, "Skew Analysis and Bounded Skew Constraint Methodology for Rotary Clocking Technology", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2010, pp. 413--417. PAPER
75. Vinayak Honkote and Baris Taskin, "Analysis, Design and Simulation of Capacitive Load Balanced Rotary Oscillatory Array", Proceedings of the International Conference on VLSI Design (VLSID), January 2010, pp. 218--223. PAPER
76. Jianchao Lu and Baris Taskin, "Incremental Register Placement for Low Power CTS", Proceedings of the IEEE International SoC Design Conference (ISOCC), November 2009, pp. 232--236. PAPER
77. Vinayak Honkote and Baris Taskin, "Skew Analysis and Design Methodologies for Improved Performance of Resonant Clocking", Proceedings of the IEEE International SoC Design Conference (ISOCC), November 2009, pp. 165--168. PAPER
78. Jianchao Lu and Baris Taskin, "Post-CTS Clock Skew Scheduling with Limited Delay Buffering", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2009, pp. 224--227. PAPER
79. Vinayak Honkote and Baris Taskin, "Design Automation Scheme for Wirelength Analysis of Resonant Clocking Technologies", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2009, pp. 1147--1150. PAPER
80. Vinayak Honkote and Baris Taskin, "Capacitive Load Balancing for Mobius Implementation of Standing Wave Oscillator", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2009, pp. 232--235. PAPER
81. Vinayak Honkote and Baris Taskin, "Zero Clock Skew Synchronization with Rotary Clocking Technology", Proceedings of the IEEE International Symposium on Quality Electronic Design (ISQED), March 2009, pp. 588--593. PAPER
82. Vinayak Honkote and Baris Taskin, "Custom Rotary Clock Router", Proceedings of the IEEE International Conference on Computer Design (ICCD), October 2008, pp. 114--119. PAPER
83. Baris Taskin and Jianchao Lu, "Post-CTS Delay Insertion to Fix Timing Violations", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2008, pp. 81--84. PAPER
84. Shannon Kurtas and Baris Taskin, "Statistical Timing Analysis of Nonzero Clock Skew Circuits", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2008, pp. 605--608 Best student paper award nominee. PAPER
85. Vinayak Honkote and Baris Taskin, "Maze Router Based Scheme for Rotary Clock Router", Proceedings of the IEEE International Conference on Midwest Circuits and Systems (MWSCAS), August 2008, pp. 442--445. PAPER
86. Baris Taskin, Andy Chiu, Jonathan Salkind, Dan Venutolo, "A Shift-Register Based QCA Memory Architecture", Proceedings of the IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH), October 2007, pp. 54--61. PAPER
87. Prawat Nagvajara and Baris Taskin, "Design-for-Debug: A Vital Aspect in Education", Proceedings of the International Conference on Microelectronic Systems Education (MSE), June 2007, pp. 65--66. PAPER
88. Baris Taskin and Ivan S. Kourtev, "A Timing Optimization Method Based on Clock Skew Scheduling and Partitioning in a Parallel Computing Environment", Proceedings of the IEEE International Midwest Symposium on Circuits and Systems (MWSCAS), August 2006, pp. 486--490. PAPER
89. Baris Taskin, John Wood and Ivan S. Kourtev, "Timing-Driven Physical Design for VLSI Circuits Using Resonant Rotary Clocking", Proceedings of the IEEE International Midwest Symposium on Circuits and Systems (MWSCAS), August 2006, pp. 261--265. PAPER
90. Baris Taskin and Bo Hong, "Dual-Phase Line-Based QCA Memory Design", Proceedings of the IEEE Conference on Nanotechnology (IEEE NANO), July 2006, pp. 302--305. PAPER
91. Baris Taskin and Ivan S. Kourtev, "Delay Insertion Method in Clock Skew Scheduling", Proceedings of the ACM International Symposium on Physical Design (ISPD), Apr. 2005, pp. 47--54. PAPER
92. Baris Taskin and Ivan S. Kourtev, "Performance Improvement of Edge-Triggered Sequential Circuits", Proceedings of the IEEE International Conference on Electronics, Circuits and Systems (ICECS), December 2004, pp. 607--610. PAPER
93. Baris Taskin and Ivan S. Kourtev, "Advanced Timing of Level-Sensitive Sequential Circuits", Proceedings of the IEEE International Conference on Electronics, Circuits and Systems (ICECS), December 2004, pp. 603--606. PAPER
94. Baris Taskin and Ivan S. Kourtev, "Time Borrowing and Clock Skew Scheduling Effects on Multi-Phase Level-Sensitive Circuits", Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), May 2004, Vol. 2, pp. II-617--620. PAPER
95. Baris Taskin and Ivan S. Kourtev, "Performance Optimization of Single-Phase Level-Sensitive Circuits Using Time Borrowing and Non-Zero Clock Skew", Proceedings of the ACM/IEEE International Workshop on Timing Issues in the Specification and Synthesis of Digital Systems (TAU), December 2002, pp. 111--117. PAPER
96. Baris Taskin and Ivan S. Kourtev, "Linear Timing Analysis of SOC Synchronous Circuits with Level-Sensitive Latches", Proceedings of the IEEE International ASIC/SOC Conference, September 2002, pp. 358--362. PAPER

Journals

1. Ragh Kuttappa, Selcuk Kose, and Baris Taskin, "FOPAC: Flexible On-Chip Power and Clock", IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), Submitted March 2019 File:TCAS R1 FOPAC.pdf.
2. Yuqiao Liu, Oday Bshara, Ibrahim Tekin, Christopher Israel, Ahmad Hoorfar, Baris Taskin, Kapil Dandekar, "Design and Fabrication of a Two-Port Three-Beam Switched Beam Antenna Arrayfor 60 GHz Communication", IET Microwaves, Antennas & Propagation, online March 2019, DOI: 10.1049/iet-map.2018.6010.
3. Leo Filippini and Baris Taskin, “The adiabatically driven strongarm comparator,” IEEE Transactions on Circuits and Systems II: Express Briefs (TCAS-II), February 2019. PAPER
4. Ragh Kuttappa, Adarsha Balaji, Vasil Pano, Baris Taskin, and Hamid Mahmoodi, "RotaSYN: Rotary Traveling Wave Oscillator SYNthesizer", IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), February 2019. PAPER
5. Weicheng Liu, Can Sitik, Savithri Sundareswaran, Benjamin Huang, Emre Salman and Baris Taskin, "SLECTS: Slew-Driven Clock Tree Synthesis", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 27, No.4, pp.864--874, April 2019. PAPER
6. Scott Lerner, Isikcan Yilmaz, and Baris Taskin, "Custard: ASIC Workload-Aware Reliable Design for Multi-core IoT Processors", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), vol. 27, No. 3, pp. 700-710, March 2019. PAPER
7. Scott Lerner and Baris Taskin, "Slew Merging Region Propagation for Bounded Slew and Skew Clock Tree Synthesis", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 27, No. 1, pp. 1-10, January 2019. PAPER
8. Ankit More, Vasil Pano, and Baris Taskin, "Vertical Arbitration-free 3D NoCs," IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), Vol. 37, No. 9, pp. 1853--1866, September 2018. PAPER
9. K. Sangaiah, M. Lui, R. Jagtap, S. Diestelhorst, S. Nilakantan, A. More, B. Taskin, and M. Hempstead, "SynchroTrace: Synchronization-aware Architecture-agnostic Traces for Light-Weight Multicore Simulation of CMP and HPC Workloads", ACM Transactions on Architecture and Code Optimization (TACO), Vol. 15, No. 1, Article 2, March 2018. PAPER
10. Can Sitik, Weicheng Liu, Baris Taskin and Emre Salman, "Design Methodology for Voltage-Scaled Clock Distribution Networks," IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 24, No. 10, pp. 3080--3093, October 2016. PAPER
11. Ankit More and Baris Taskin, "Locality-Aware Network Utilization Balancing in NoCs", ACM Transactions on Design Automation of Electronic Systems (TODAES), Vol. 21, No. 1, Article 6, November 2015. PAPER
12. Ying Teng and Baris Taskin, "ROA-Brick Topology for Low-Skew Rotary Resonant Clock Network Design", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 23, No. 11, pp. 2519--2530, November 2015. PAPER
13. Can Sitik, Emre Salman, Leo Filippini, Sung Jun Yoon and Baris Taskin, "FinFET-Based Low Swing Clocking", ACM Journal of Emerging Technologies in Computing Systems (JETC), Vol. 12, No. 2, Article 13, August 2015. PAPER
14. Can Sitik and Baris Taskin, "Iterative Skew Minimization for Low Swing Clocks", Elsevier Integration, The VLSI Journal, Vol. 47, No. 3, pp. 356--364, June 2014. PAPER
15. Vinayak Honkote and Baris Taskin, "ZeROA: Zero Clock Skew Rotary Oscillatory Array", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 20, No. 8, pp. 1528--1532, August 2012. PAPER
16. Jianchao Lu, Ying Teng and Baris Taskin, "A Reconfigur​able Clock Polarity Assignment Flow for Clock Gated Designs", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 20, No. 6, pp. 1002--1011, June 2012. PAPER
17. Jianchao Lu, Xiaomi Mao and Baris Taskin, "Integrated Clock Mesh Synthesis with Incremental Register Placement", IEEE Transactions on Computer Aided Design of Integrated Circuits and Systems (TCAD), Vol. 31, No. 2, pp. 217--227, February 2012. PAPER
18. Jianchao Lu and Baris Taskin, "Clock Buffer Polarity Assignment with Skew Tuning", ACM Transactions on Design Automation of Electronic Systems (TODAES), Vol. 16, No. 4, Article 49, October 2011. PAPER
19. Vinayak Honkote and Baris Taskin, "CROA: Design and Analysis of Custom Rotary Oscillatory Array", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 19, No. 10, pp. 1837--1847, October 2011. PAPER
20. Shannon M. Kurtas and Baris Taskin, "Statistical Timing Analysis of the Clock Period Improvement through Clock Skew Scheduling", International Journal of Circuits, Systems and Computers (JCSC), Vol. 20, No. 5, pp. 881--898, 2011. PAPER
21. Kyle Yencha, Matthew Zofchak, Daniel Oakum, Gerre Strait, Baris Taskin, Bahram Nabet, "Design of an Addressable Internetworked Microscale Sensor", Special Issue: Journal of Selected Areas in Microelectronics (JSAM), December 2010, ISSN: 1925-2676. PAPER
22. 
    Ying Teng and Baris Taskin, "Look-up Table Based Low Power Rotary Traveling Wave Design Considering the Skin Effect", Journal of Low Power Electronics (JOLPE), Vol. 6, No. 4, pp. 491--502, December 2010, Cover feature. PAPER
23. Jianchao Lu and Baris Taskin, "Post-CTS Delay Insertion", Journal of VLSI Design, Volume 2010 (2010), Article ID 451809. PAPER
24. Baris Taskin and Ivan S. Kourtev, "Multi-Phase Synchronization of Non-Zero Clock Skew Level-Sensitive Circuit", International Journal on Circuits, Systems and Computers (JCSC), Vol. 18, No. 5, pp. 899--908, July 2009. PAPER
25. Baris Taskin, Joseph DeMaio, Owen Farell, Michael Hazeltine, Ryan Ketner, "Custom Topology Rotary Clock Router", ACM Transactions on Design Automation of Electronic Systems (TODAES), Vol. 14, No. 3, Article 44, May 2009. PAPER
26. Baris Taskin, Andy Chiu, Joseph Salkind, Dan Venutolo, "A Shift-Register Based QCA Memory Architecture", ACM Journal on Emerging Technologies and Computation (JETC), Vol. 5, No. 1, Article 4, January 2009. PAPER
27. Baris Taskin and Bo Hong, "Improving Line-Based QCA Memory Cell Design Through Dual-Phase Clocking", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 16, No. 12, pp. 1648--1656, December 2008. PAPER
28. Baris Taskin and Ivan S. Kourtev, "Delay Insertion Method in Clock Skew Scheduling", IEEE Transactions on Computer Aided Design of Integrated Circuits and Systems (TCAD), Vol. 25, No. 4, pp. 651--663, April 2006. PAPER
29. Baris Taskin and Ivan S. Kourtev, "Linearization of the Timing Analysis and Optimization of Level-Sensitive Digital Synchronous Circuits", IEEE Transactions on Very Large Scale Integration (VLSI) Systems (TVLSI), Vol. 12, No. 1, pp. 12--27, January 2004. PAPER

Books and Book Chapters

1. Ivan S. Kourtev, Baris Taskin and Eby G. Friedman, Timing Optimization through Clock Skew Scheduling, Springer, 2009, ISBN-13: 978-0387710556.
2. Baris Taskin, Ivan S. Kourtev and Eby G. Friedman, System Timing, Handbook of VLSI, 2nd edition, Editor: W. K. Chen, CRC Publishing, December 2006.

• 

  Springer link [1]

• 

  Amazon link [2]

Thesis and Dissertations

• A. Can Sitik, Ph.D. Dissertation: Design and Automation of Voltage-Scaled Clock Networks, 2015

• Ying Teng, Ph.D. Dissertation: Low Power Resonant Rotary Global Clock Distribution Network Design, 2014

• Ankit More, Ph.D. Dissertation: Network-on-Chip (NoC) Architectures for Exa-Scale Chip-Multi-Processors (CMPs), 2013

• Jianchao Lu, Ph.D. Dissertation, High Performance IC Clock Networks with Mesh and Tree Topologies, 2011

• Vinayak Honkote, Ph.D. Dissertation, Design Automation and Analysis of Resonant Clocking Technologies, 2010

• Shannon M. Kurtas, M.S. Thesis, Statistical Static Timing Analysis of Nonzero Clock Skew Circuits, 2007