1. Sun, W., “3D Cell Printing in Vitro Biological Models for
Tissue Engineering”, Symposium on Biofabrication: 3D Printing
of Regenerative Medical Implants, the 2015 TERMIS World
Congress, Boston, MA, USA, September 10, 2015
2. Sun, W., “3D Bio-printing: Challenges and Opportunities”,
Symposium on Bioprinting and Stem Cells at the 11th Annual
Meeting of Korean Society for Stem Cell Research, Seoul,
Korea, August 28, 2015
3. Liu, Y., Hamid Q. and Sun, W.,” In situ Printing – An
Alternative Three Dimensional Laden Structure Fabrication
Method”, 2015 Solid Freeform Fabrication Symposium. August
10-13, 2015. Austin, TX, USA
4. Jessica Snyder, Ae Rin Son, Qudus Hamid, Chengyang Wang,
Yigong Lui, Wei Sun,” Stem Cell Printing and Process Regulated
Cell Properties”, 2015 Solid Freeform Fabrication Symposium.
August 10-13, 2015. Austin, TX, USA
5. Qudus Hamid, Chengyang Wang, Jessica Snyder, Shannon
Williams, and Wei Sun,” Mask-less Fabrication of Cell-laden
Microfluidic Chips with localized Surface Functionalization
for the Co-culture of Cancer Cells”, 2015 Solid Freeform
Fabrication Symposium. August 10-13, 2015. Austin, TX, USA
6. Sun, W., “3D Cell Printing for In Vitro Drug Models”,
3D-Printing in Life Sciences Conference, Boston, MA, USA, ,
July 9, 2015
7. Sun, W., “3D Cell Printing of In Vitro Biological Models
for Drug and Disease Study”, Korea-China-USA Nano Forum 2015
at Nano Korea 2015, Seoul, Korea, July 2, 2015
8. Sun, W. and Yao, R., “Bio 3D Printing In Vitro Cell/Tissue
Models for Drug Testing”, the First Annual World Preclinical
Congress. Boston, MA, USA, , June 11, 2015
9. Sun, W., “3D Cell Printing In Vitro Drug Testing Models for
Tissue Engineering”, The 2nd International Conference on
Regenerative Biomedical Materials, ICRBM 2015. Wuhan, China, ,
June 5, 2015
10. Sun, W., “3D Cell Printing for In Vitro Drug Testing
Model”, Symposium on Convergence of biomedicine and
nanotechnology at 2015 Annual International Conference of
Korean Society for Biochemistry and Molecular Biology. Seoul,
Korea, May 13, 2015
11. Sun, W., “3D Cell Printing for in Vitro Drug testing
Model”, Symposium on 3D Bioprinting, the 5th CESB
(China-Europe Symposium on Biomaterials in Regenerative
Medicine)”, Hangzhou, China, April 8, 2015
12. Rui Yao, Jie Luan, Renji Zhang, Feng Lin, Wei Sun, “In
Vitro Biofabrication and In Vivo Regeneration of Adipose
Tissue and Liver”, 2014 International Conference on Additive
Manufacturing and Bio-manufacturing. Beijing, China, Nov. 13,
2014.
13. Yu Zhao, Rui Yao, Liliang Ouyang, Hongxu Ding. Ting Zhang,
Kaitai Zhang, Shujun Cheng, Wei Sun, “3D Printing of cervical
tumor model for anti-tumor drug testing”, 2014 International
Conference on Additive Manufacturing and Bio-manufacturing,
Beijing, China, Nov. 13, 2014.
14. Liliang Ouyang, Rui Yao, Xi Chen, Jie Na, Wei Sun, “3D
printing of human embryonic kidney 293FT cells with hydrogel:
study the cell viability and biological functions”, 2014
International Conference on Additive Manufacturing and
Bio-manufacturing, Beijing, China, Nov. 13, 2014.
15. Long Zhao, Karen Chang Yan, Rui Yao, Feng Lin, Wei Sun,”
Controlled Micro-droplet Deposition and Application for Cell
Printing”, 2014 International Conference on Additive
Manufacturing and Bio-manufacturing. Beijing, China, Nov. 13,
2014.
16. T. Zhang, Z. Xiong, F. Lin, W. Sun, “From 3D to 4D
bio-printing——Design and fabrication of biomimetic tissue
constructs with RP techniques”, 2014 International Conference
on Additive Manufacturing and Bio-manufacturing. Beijing,
China, Nov. 13, 2014.
17. Sun, W., “3D Bio-printing: Challenges and Opportunities”,
the International Symposium "MHS2014”, Nagoya, Japan, November
10, 2014
18. Sun, W., “3D Bio-printing: Challenges and Opportunities”,
3D Bioprinting and Biofabrication Conference, Moscow, Russian,
October 22, 2014.
19. Sun, W., “Bio – 3D Printing of In Vitro Cell/ Tissue
Models: Human Tissues: 3D Printing”, Systems Toxicology
Workshop, Beijing, China, October 14, 2014.
20. Rui Yao, Jie Luan, Renji Zhang, Feng Lin, Wei Sun,” In
vitro construction and in vivo regeneration of tissues with
lobule structure”, 2014 International Symposium on 3D
Printing. Oct. 2, 2014 Seoul, Republic of Korea.
21. T. Zhang, Z. Xiong, F. Lin, W. Sun, “Recent progresses on
Design and Fabrication of Biomimetic Scaffolds with
Rapid-prototyping (3D printing) techniquees”, 2014
International Conference on Biofabrication, Pohang, Korea,
September 30, 2014
22. Yu Zhao, Rui Yao, LiLiang Ouyang, Wei Sun,” 3D printing of
cervical tumor model for anti-tumor drug testing”, 2014
International Conference on Biofabrication, Pohang, Korea,
September 30, 2014.
23. Liliang Ouyang, Rui Yao, Wei Sun,” 3D Bioprinting of mESC
with hydrogel for Embryoid Body formation”, 2014 International
Conference on Biofabrication, Pohang, Korea, September 30,
2014.
24. Long Zhao, Chang K. Yan, Rui Yao, Feng Lin, Wei Sun,”
Controlled Micro-droplet Deposition And Application For Cell
Printing”, 2014 International Conference on Biofabrication,
Pohang, Korea, September 30, 2014.
25. Long Zhao, Chang K. Yan, Rui Yao, Feng Lin, Wei Sun,” 3D
Cell Printing and Modeling Based On Alternating Force Drived
Drop-on-demand Micro-droplet Deposition”, 2014 Tissue
Engineering and Regenerative Medicine International
Society-Asia Pacific Meeting. 2014 Sep. 26, Daegu, Republic of
Korea.
26. T. Zhang, Z. Xiong, F. Lin, W. Sun, “Biomimetic Design And
Fabrication Of Scaffolds For Functional Tissue Regeneration
With Rapid-prototyping (3D Printing) Technique”, 2014 Tissue
Engineering and Regenerative Medicine International
Society-Asia Pacific Meeting. 2014 Sep. 26, Daegu, Republic of
Korea.
27. Rui Yao, Mingen Xu, Renji Zhang, Feng Lin, Wei Sun,” In
Vitro Angiogenesis of 3D printed Adipose Tissue”, 2014 Solid
Freeform Fabrication Symposium. Aug. 6, 2014. Austin, USA.
28. Yu Zhao, Rui Yao, Liliang Ouyang, Hongxu Ding, Ting Zhang,
Kaitai Zhang, Shujun Cheng, Wei Sun,” 3D Printing of In Vitro
Cervical Tumor Models: Fabrication and Characterization”, 2014
Solid Freeform Fabrication Symposium. Aug. 6, 2014. Austin,
USA.
29. Long Zhao, Chang K. Yan, Rui Yao, Feng Lin, Wei Sun,”
Alternating Force Based Drop-on-demand Micro-droplet
Deposition for 3D Printing”, 2014 International Solid Freeform
Fabrication Symposium. Aug. 6, 2014. Austin, USA
30. Zhao, Y., Ouyang, L., Ding, H., Cai, D., Zhang, T. and
Sun, W., “Engineering in vitro 3D tumor model using
cell-assembling technology”, TERMIS-AP 2013 Shanghai and
Wuzhen, China, Oct. 13-15, 2013.
31. Zhao, L., Chang, K., Lin, F. and Sun, W., “Controlled
micro-droplet deposition and application for cell printing”,
TERMIS-AP 2013 Shanghai and Wuzhen, China, Oct. 13-15, 2013.
32. Yan, K., Paluch, K., Nair, K. and Sun, W., “Modeling and
Analysis of Bio-prinitng Process-induced Local Environment for
Cells”, China Mechanics Annual Conference, Symposium of Cell
Biomechanics, Xian, August 19-21, 2013.
33. Snyder, J., Son, A. and Sun, W., “Packaging Multiple Cell
Types by Cell Printing with a Microfluidic Printhead”, 24th
Annual International SFF Symposium, Austin, Texas, USA, August
5-7, 2013.
34. Hamid, Q., Wang, C. and Sun, W., “An Additive
Photolithographic System for Fabrication of Microfluidics”,
24th Annual International SFF Symposium, Austin, Texas, USA,
August 5-7, 2013.
35. Hamid, Q., Wang, C., Zhao, Y., Snyder, J. and Sun, W.,
“Surface Treatment of SU-8 for the Development of Biological
Microfluidics”, 2013 Advances in Microfluidics &
Nanofluidics meeting, University of Notre Dame, Indiana, USA,
24-26 May 2013.
36. Li, Y., Zhang, L., Liu, CY, Lin, F. and Sun, W., “A novel
3-D directly controlled cell assembling system for cell
constructs”, Proceedings of International Conference on
Advanced manufacturing and Manufacturing Process, Dec. 22-24,
2012, Beihai, Guangxi, China.
37. Ouyang, L. and Sun, W., “Construction of soft tissue in
vitro and its characterization of mechanical properties”, 2012
International Conference on Biofabrication-BF2012, Manchester,
UK, 28-31 October 2012.
38. Hamid, Q., Zhao, Y. and Sun, W., “An Interconnected
Mircofluidic Tissue Array for Pharmaceutical Investigations”,
2012 International Conference on Biofabrication-BF2012,
Manchester, UK, 28-31 October 2012.
39. Lin, MF, Zhang, T., Sun, W., Xing, Z., “Fabrication and
assembling of hydrogel fibers into 3D bunchy constructs for
engineering cardiac tissue”, the 3rd TERMIS World Congress,
Sept. 5-8, 2012, Vienna, Austria: Journal of Tissue
Engineering and Regenerative Medicine, 2012, 6(Sup. 1), 384,
Sep. 2012.
40. Hamid, Q. and Sun, W., “Fabrication Of Micro Organs And
Biosensors Using A Digital Micro-mirroring Microfabrication
System”, 2012 International Symposium on Flexible Automation,
St. Louis, MO, USA, June 18-20, 2012.
41. Snyder, J., Hunger, P., Wang, C., Wegst, U. and Sun, W.,
“Controlled porosity of ceramic scaffold by directional freeze
casting and scaffold printing”, Proceedings of 2012
International Symposium on Flexible Automation, St. Louis, MO,
USA, June 18-20, 2012.
42. Wang, C., Hamid, Q., Ayan, H. and Sun, W., “A Novel
Automation System for Microplasma Surface Patterning and
Biologics Printing”, Proceedings of 2012 International
Symposium on Flexible Automation, St. Louis, MO, USA, June
18-20, 2012.
43. Lin, MF., Zhang, T., Sun, W. and Xiong, Z., “Hydrogel
fibers based modular approach for fabrication of vascularized
bunchy constructs”, Proceedings of the 9th World Biomaterials
Congress, June 1-5, 2012, Chengdu, China.
44. Zhang, LQ., Zhang, T., Sun, W., Lin, F. and Xiong, Z.,
“Enhanced hydrophilicity of PLGA/TCP scaffold by novel
low-temperature deposition nozzle with collagen”, Proceedings
of the 9th World Biomaterials Congress, June 1-5, 2012,
Chengdu, China.
45. Zhao, Yu, Zhang T., Lin, F. and Sun, W., “Controlled cell
assembly for 3D tumor model – a preliminary study”,
Proceedings of the 9th World Biomaterials Congress, June 1-5,
2012, Chengdu, China.
46. Zhang, L., Cao, Y., Zhao, L., Lin, F. and Sun, W.,
“Precise Cell Printing Based on Digital Micro-injection”,
Proceedings of the 9th World Biomaterials Congress, June 1-5,
2012, Chengdu, China.
47. Li, Y., Zhang, L. and Sun, W., “A Four-nozzle Multi-cell
Assembling Machine”, Proceedings of the 9th World Biomaterials
Congress, June 1-5, 2012, Chengdu, China.
48. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform
Maskless Biopolymer Patterning and Biologics Printing for
Tissue Engineering Applications”, Proceedings of the 9th World
Biomaterials Congress, June 1-5, 2012, Chengdu, China.\
49. Hamid, Q. and Sun, W., “A Digital Micro-Mirror -Based
Biofabrication of Cell-laden Micro-fluidic Device”,
Proceedings of the 9th World Biomaterials Congress, June 1-5,
2012, Chengdu, China.
50. Snyder, J., Hunger, P., Wang, C., Meyers, N., Wegst, U.
and Sun, W., “Hierarchical Porous Ceramic Scaffolds by Freeze
Casting Fabrication Method”, Proceedings of the 9th World
Biomaterials Congress, June 1-5, 2012, Chengdu, China.
51. Wang, C., Hamid, Q., Ayan, H. and Sun, W., “Dual
Functional Platform for Microplasma Surface Patterning and
Biologics Printing”, Proceedings of the 9th World Biomaterials
Congress, June 1-5, 2012, Chengdu, China.
52. Snyder, J., Hunger, P., Wang, C., Meyers, N., Wegst, U.
and Sun, W., “Hierarchical Porous Ceramic Scaffolds by Freeze
Casting Fabrication Method”, 9th World Biomaterials Congress,
Chengdu, China, June 1-5, 2012.
53. Hamid, Q. and Sun, W., “A Digital Micro-mirror
Device-Based System for the Biofabrication of Cancer Tissue
Models”, 9th World Biomaterials Congress, Chengdu, China, June
1-5, 2012.
54. Zhao, Y., Zhang, T., Lin, F., Snyder, J. Hamid, Q., Wang,
C. and Sun, W., “Bioprinting 3D In-Vitro Model for Tissue
Science and Engineering”, Predictive Functional Human Tissue
Models Conference, Boston, MA, USA, November 17-18, 2011.
55. Sun, W., “From Tissue Engineering to Tissue Science and
Engineering - A new paradigm for Biofabrication”, 2011
International Conference of Biofabrication, Toyama, Japan,
October 6-8, 2011.
56. Hamid, Q., Wang, C., Ayan, H. and Sun, W., “Dual
functional freeform microplasma surface patterning and
biologics printing”, 2011 International Solid Freeform
Fabrication Symposium, Austin, TX, USA, August 6-8, 2011.
57. Snyder, J., Wang, C., Hamid, Q. and Sun, W., “Combined SFF
Patterning and Replica Molding for Microfabrication of
Cell-Laden Microfluidic Device”, 2011 International Solid
Freeform Fabrication Symposium, Austin, TX, USA, August 6-8,
2011.
58. Zhang, T, Zhang, L., Zhang, R., Lin,F., Hamid, Q., Snyder,
J., Wang, C. and Sun, W., “Cell printing for 3D tissues”,
TERMIS EU2011, Granada, Spain, June 7-10, 2011.
59. Sun, W., “Advances on Bio-Additive Manufacturing”, China
5th Rapid Prototyping Conference, Xian, China, May 16-17,
2011.
60. Snyder, J., Du, B., Zhang, Y. Emami, K., Wu, H. and Sun,
W., “Kinetics of in vitro drug metabolism in human hepatic
cells cultured in a rotating bioreactor”, 18th IAA Humans in
Space Symposium, Houston, TX, USA, April 11-15, 2011.
61. Sun, W., “Biofabrication of Biomaterials for Tissue
Science and Engineering”, 3rd China-Europe Symposium on
Biomaterials in Regenerative Medicine (CESB2011), Nanjing,
China, April 6-8, 2011.
62. Snyder, J., Hamid, Q., Wang, C., Xu,, M., Nah-Cederquist,
HD and Sun, W., “Process-Induced Mechanosensation of Stem Cell
during Printing”, 2011 Translational Regenerative Medicine
Forum, Washington, DC, USA, April 6-8, 2011.
63. Sun, W., Liebschner, M., “Integrated Design/Manufacturing
in Musculoskeletal Tissue Engineering Scaffolds:, ORS 2011
Annual Meeting in Long Beach, California, USA, January 13-16,
2011.
64. Sun, W., Barbee, K. and Marcolongor, M., “Study
Bio-Deposition Induced Effect on Living Cells”, 2011 NSF CMMI
Research and Innovation Conference, Atlanta, GA, USA, January
4-7, 2011.
65. Sun, W., and Ayan, H., “A dual functional freeform
microplasma surface patterning and biologics printing”, 2011
NSF CMMI Research and Innovation Conference, Atlanta, GA, USA,
January 4-7, 2011
66. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform
Maskless Cell Patterning with 3D Motion System for Tissue
Engineering Applications”, TERMIS NA 2010 Conference and
Exposition, Orlando, Florida, USA, December 5-8, 2010.
67. Snyder, J. and Sun, W., “Bi-additive process for cell
printing”, TERMIS NA 2010 Conference and Exposition, Orlando,
Florida, USA, December 5-8, 2010.
68. Yan, K., McMullin, E. and Sun, W., “Modeling of
Poly-ε-caprolactone Scaffold Degradation”, ASME 2010
International Mechanical Engineering Congress &
Exposition, Vancouver, Canada, Nov. 12-18, 2010.
69. Snyder, J., Sun, Y., Nah-Cederquist HD, Xu., M. and Sun,
W., “Mesenchymal Stem Cell Printing and Possible Phenotype
Reprogramming”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010
70. Snyder, J., Chang, R., Culbertson, C., Emami, K., Hu, H.
and Sun, W., “Novel Temperature Controlled Printing System and
Microfluidic Chip Coupled for In Vitro Radiation Study”, 2010
International Conference on Biofabrication, Philadelphia, PA,
USA, Oct. 4-6, 2010.
71. Hamid, Q., Wang, C., Timmer, M., Hammer, J., Guceri, S.
and Sun, W., “Feasibility and Fabrication of Three-dimensional
Scaffold”, 2010 International Conference on Biofabrication,
Philadelphia, PA, USA, Oct. 4-6, 2010.
72. Hamid, Q., Wang, C., Guceri, S. and Sun, W., “Gelatin
Nanofibers with Encapsulated Cells Assembled by Coaxial
Electrospinning”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
73. Kalidindi, A., Cederquist, A., Snyder, J., Hamid, Q.,
Yildirim, E. and Sun, W., “Establishing Optimal Bioprinting
Process Parameters for Human Mesenchymal Stem Cell Viability”,
2010 International Conference on Biofabrication, Philadelphia,
PA, USA, Oct. 4-6, 2010.
74. Yan, K., McMullin, E., Wang, C. and Sun, W., “Study of
Design Parameter and Environmental Effects on Biopolymer
Scaffold Degradation”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
75. Ayan, H., Yildirim, E., Pappas, D. and Sun, W., “Freeform
Maskless Cell and Biomolecule Patterning for Tissue
Engineering Applications”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
76. Yildirim, E., Pappas, D., Guceri, S. and Sun, W.,
“Combined Effect of Plasma and Protein Surface
Functionalization of Polycaprolactone Tissue Scaffolds on
Cellular Functions”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010
77. Xu, M., Ge, K., Guo, M., Snyder, J and Sun, W., “Screening
drug candidates for metabolic syndrome by an cell-assembly
technique derived 3-D model”, 2010 International Conference on
Biofabrication, Philadelphia, PA, USA, Oct. 4-6, 2010.
78. Snyder, J. and Sun, W., “Bioprinting Cells and Injury
Analysis”, 2010 International Workshop on Cell Mechanics and
Bioengineering”, Xian,China, August 20-22, 2010.
79. Sun, W., “Biomanufacturing for Tissue Science and
Engineering: a new paradigm for modern design and
manufacturing”, 2010 International Conference on Frontiers
Design and Manufacturing”, Changsha, China, July 17-19, 2010.
80. Snyder, J. and Sun, W., “Bio-additive Manufacturing for
Cell Printing”, International Solid Freeform Fabrication
Symposium, Austin, TX, USA, August 9-11, 2010.
81. Yildirim, E., Ayan, H., Pappas, D., Fridman, A., Sun. W.,
“Freeform Plasma Generated Maskless Cell Patterning for Tissue
Engineering Applications”, International Conference on
Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA,
USA, April 26-30, 2010
82. Yildirim, E., Ayan, H., Fridman, A., Sun. W., “Freeform
Maskless Nanopatterning for Tissue Engineering Applications”,
ASME 2010 First Global Congress on NanoEngineering for
Medicine and Biology (NEMB2010), Houston, TX, February 7-10,
2010.
83. Hamid, Q. and Sun. W., “Co-axial Electrosinning Biopolymer
with Living Cells”, ASME 2010 First Global Congress on
NanoEngineering for Medicine and Biology (NEMB2010), Houston,
TX, February 7-10, 2010.
84. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings
of The Second International Symposium on Computational
Mechanics (ISCM II)/ The Twelfth International Conference on
the Enhancement and Promotion of Computational Methods in
Engineering and Science (EPMESC XII), Hong Kong and Macao,
Nov. 30-Dec. 3, 2009
85. Yan, K., Sun, W., Swift, M. and Roros, C., “Effects of
Scaffold Design Parameters and Local Environment on Biopolymer
Scaffold Degradation”, Proceedings of 2009 ASME IMECE
conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
86. Yan, K., Paulch, K., Nair, K. and Sun, W., “Effects of
Process Parameters on Cell Damage in a 3D Alginate Tissue
Construct with Cell Encapsulated”, Proceedings of 2009 ASME
IMECE conference, Lake Buena Vista, FL, USA, Nov. 13-19, 2009.
87. Snyder J., Roy, D., Chang, R., Bergenstock, M., Liu, Q.
and Sun, W., “Solid Freeform Fabrication for Biomimetic Tissue
Constructs”, Proceedings of 2009 ASME IMECE conference, Lake
Buena Vista, FL, USA, Nov. 13-19, 2009.
88. Liu W., Lau, W., Liu Q. and Sun, W., “Solid Freeform
Fabrication for Biomimetic Tissue Constructs”, Proceedings of
2009 ASME IMECE conference, Lake Buena Vista, FL, USA, Nov.
13-19, 2009.
89. Yildirim, E., Ayan, H., Pappas, Bujanda, A., D., Fridman,
A., Sun. W., “Patterned Growth of Cells and Biomolecules using
a Microplasma Printing System”, AVS 56th International
Symposium and Exhibition, San Jose, CA, Nov. 8-13, 2009.
90. Bergenstock, M., Balaburski, G., Lau, W., Sun, W., Sun, Q.
and Liu, Q., “A Novel In Vitro Three-Dimensional Breast Cancer
Model Using Polystyrene Scaffolds”, American Association of
Cancer Research: Advances In Breast Cancer Research, San
Diego, CA, USA, October 13th-16th, 2009.
91. Bergenstock, M., Balaburski, G., Lau, W., Sun, W., Sun, Q.
and Liu, Q., “Polystyrene Scaffolds: A Novel Tool For In Vitro
Three-Dimensional Cancer Models”, American Association of
Cancer Research: Frontiers in Basic Cancer Research, Boston,
MA, USA, October 8th-11th, 2009.
92. Li, J., Regli, W. and Sun, W., “Virtual Network Design and
Physiology Analysis”, Proceedings of 2009 SIAM/ACM Joint
Conference on Geometric and Physical Modeling, San Francisco,
CA, USA, Oct. 5-8, 2009.
93. Liu, W., Bergenstock, M., Lau, W., Sun, W., Liu, Q.,
“Novel Poly-ε-caprolactone (PCL) Scaffolds For
Three-Dimensional Stem Cell Differentiation”, New Jersey Stem
Cell Symposium, Bridgewater, New Jersey, USA, September 24,
2009.
94. Starly, B., and Sun, W., “A Graduate Course in Computer
Aided Tissue Engineering (CATE) For Engineering Majors”, 2nd
World Congress of Tissue Engineering and Regenerative
Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009
95. Sun, W., “Biofabrication for Tissue Scienece and
Engineering”, 2nd World Congress of Tissue Engineering and
Regenerative Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009.
96. Chang, R., Snyder, J., Wu, H. and Sun, W., “Bioprinting
Cell-Laden Matrigel Constructs for Multicompartment Tissue
Chambers”, 2nd World Congress of Tissue Engineering and
Regenerative Medicine, Seoul, Korea, Aug. 31 to Sep. 3, 2009.
97. Bergenstock, M., Lau, W., Sun, W., Sun, Q., Liu, Q.,
“Superior 3D In Vitro Tumor Models Using Polystyrene
Scaffolds”, 2nd World Congress on Tissue Engineering and
Regenerative Medicine, Seoul, Korea, August 30-September 2,
2009.
98. Liu, W., Bergenstock, M., Lau, W., Sun, W., Liu, Q.,
“Comparison Of Osteogenic Cell Differentiation Within 2D And
3D Culture Systems”, 2nd World Congress on Tissue Engineering
and Regenerative Medicine, Seoul, Korea, August 30-September
2, 2009.
99. Yildirim, E., Caldwell, R., Fogg, M., Nah. H., and Sun,
W., “Medical Image Reconstruction and Solid Freeform
Fabrication Assisted Custom Implant Design for Sticker
Syndrome Patient”, International Solid Freeform Fabrication
Symposium, Austin, TX, USA, August 3-5, 2009.
100. Shor, L., Guceri, S. and Sun, W., “Freeform Fabrication
of Scaffold for Bone Tissue Engineering Applications”, 2009
annual meeting for tissue and cell engineering society
TCES2009, Glasgow, UK, July 8-10, 2009.
101. Sun, W., Shokoufandeh, A. and Liebschner, M.,
“Computer-Aided Tissue Engineering“, Proceedings of 2009 NSF
CMMI Research and Innovation Conference, Honolulu, Hawaii,
USA, June 22-25, 2009.
102. Sun, W., Barbee, K., and Marcolongo, M., “Study
Bio-Deposition Induced Effect on Living Cell”, Proceedings of
2009 NSF CMMI Research and Innovation Conference, Honolulu,
Hawaii, USA, June 22-25, 2009.
103. Buyukhatipoglu, K., Chang, R., Sun, W. and Clyne A.,
“Bioprinted Nanoparticles for Tissue Engineering
Applications”, Proceedings of the ASME 2009 Summer
Bioengineering Conference (SBC2009), Resort at Squaw Creek,
Lake Tahoe, CA, USA, June 17-21, 2009.
104. Yildirim, E., Bsunder, R., Bently, L., Allen, F., Guceri,
S. and Sun, W., “A Combinatorial Effect of Protein Coating
and Plasma Modification on Osteoblast Differentiation of (for)
Polycaprolactone Scaffolds”, TERMIS-North America 2008
Conference and Exposition, San Diego, CA, USA, Dec. 6-10,
2008.
105. Chang, R., Qing, L., Liu, W. and Sun, W., “3D Scaffolds
for Enhanced Cell Culture and Tissue Engineering
Applications”, TERMIS-North America 2008 Conference and
Exposition, San Diego, CA, USA, Dec. 6-10, 2008.
106. Liu, W., Lau, W., Liu, Q. and Sun, W., “Comparison of
osteogenesis of osteogenic cells within 2D and 3D Culture
Systems”, the 48th Annual Meeting of American Society for Cell
Biology, San Francisco, CA, USA, December 13-17, 2008.
107. Chang, R., W., Lau, W., Liu, Q. and Sun, W., “3D Cell
Culture for Enhancement of Cell Function”, the 48th Annual
Meeting of American Society for Cell Biology, San Francisco,
CA, USA, December 13-17, 2008.
108. Chang, R., Liu, Q., Lau, W. and Sun, W., “3D Scaffolds to
Biomimic Physiological Microenvironment for Cell Culture and
Tissue Regeneration,” the 1st World Congress of Regenerative
Medicine and Stem Cell, Guang Zhou, China, December 3-5, 2008.
109. Chang, R., Liu, Q., Lau, W. and Sun, W.,
“Biomanufacturing for Tissue Science and Engineering”, the 2nd
International Conference of Biomanufacturing, Beijing, China,
November 6-8, 2008.
110. Yan, K., Nair, K. and Sun, W., “A Multi-scale Modeling
Based Theory for Mechanical Load Induced Cell Damage in a 3D
Cell-Encapsulated Alginate Tissue Construct,” 2008 ASME
International Mechanical Engineering Congress &
Exposition, Boston, MA, USA, October 31-November 6, 2008.
111. Nair, K., Gandhi, M., Marcolongo, M., Barbee, K. and Sun,
W., “Characterization of Cell Injury Induced by Bioprinting,”
the 13th International Biotechnology Symposium &
Exhibition (IBS-2008), Dalian, China, Oct. 12-17, 2008.
112. Chang, R., Nam, J., Jeevarajan, A., Wu, H. and Sun, W.,
“Direct Cell Writing of 3D Tissue Micro-organs for Drug
Metabolism Study,” the 13th International Biotechnology
Symposium & Exhibition (IBS-2008), Dalian, China, Oct.
12-17, 2008.
113. Yildirim, E., Guceri, S. and Sun, W., “Enhanced
Osteoblast Function on Bone Tissue Engineerign Scaffolds by
Plasma Modification,” the 13th International Biotechnology
Symposium & Exhibition (IBS-2008), Dalian, China, Oct.
12-17, 2008.
114. Chang, R., Sun, W., K. Emami, A. Jeevarajan and H. Wu,
“Bioprinting for Freeform Fabrication of Micro-Organ Tissue
Analog for Drug Metabolism Study”, 19th Solid Freeform
Fabrication Symposium, Austin, TX, USA, August 4-6, 2008.
115. Chang, R., Sun, W., Emami, K., Jeevarajan, A. and Wu, H.,
“Bioprinting of Micro-Organ Tissue Analog for Drug Metabolism
Study”, COSPAR Assembly, Montreal, Canada, July 13-20, 2008.
116. Nair, K, Yan, C and Sun, W., “Three Dimensional
Multi-Scale Modelling of Cell Deformation in Encapsulated
Alginate Scaffolds”, 8th World Biomaterials Congress,
Amsterdam, Holland, May 28-23, 2008.
117. Chang, R., Nam, J., Morss-Clyne, A., and Sun, W., “Direct
Cell Writing of Cell Encapsulated 3D Liver Tissue Constructs
Patterned With Endothelial Cells”, 8th World Biomaterials
Congress, Amsterdam, Holland, May 28-23, 2008.
118. Yildirim, E., D., Robyn Besunder, Lauren Bentley, Halim
Ayan, Alexander Fridman, Fred Allen, Wei Sun, “Concurrent
Effect of Oxygen-based Plasma Polymerization and Fibronectin
Coating of Poly e-caprolactone Surface on Osteoblast Cell
Attachment and Proliferation,” 8th World Biomaterials
Congress, Amsterdam, Holland, May 28-23, 2008.
119. Sun, W., Shokoufandeh, A. and Liberschner, M.,
“Computer-Aided Tissue Engineering”, Proceedings of 2006 NSF
Design, Service, and Manufacturing Grantees and Research
Conference, Knoxville, TN, January 6-9, 2008.
120. Holtorf H. Leslie J. Chang R, Nam J, Culbertson C, Sun
W, Gonda S, “Development of a Three-Dimensional
Tissue-on-a-Chip Micro-Organ Device for Pharmacokinetic
Analysis”, the 47th Annual Meeting of the American Society for
Cell Biology, Washington, DC, December 1-5, 2007.
121. Chang, R., Nam, J., Holtorf, H, Jeevarajan, A., Gonda,
S., Culbertson, C. and Sun, W., “Biofabrication of liver
tissue constructs on a MIcrofluidic platform for
pharmacokinetic study”, Proceedings of the International
Manufacturing Science and Engineering 2007, Atlanta, Georgia,
USA., October 15-18, 2007.
122. Yildirim, E., Güçeri, S. and Sun, W., “Effect of
Oxygen-Radio Frequency Plasma Treatment on Three-Dimensional
Poly (e-Caprolactone) Scaffolds”, Proceedings of the
International Manufacturing Science and Engineering 2007,
Atlanta, Georgia, USA., October 15-18, 2007.
123. Shor, L., Güçeri, S. and Sun, W.,
“Polycaprolatctone/Hydroxyapatite Scaffolds for Tissue
Engineering”, Proceedings of the International Manufacturing
Science and Engineering 2007, Atlanta, Georgia, USA., October
15-18, 2007.
124. Nam, J., Chang, R. and Sun, W., “Solid freeform
fabrication based bioprinting for tissue-on-a-chip systems”,
Invited paper for 18th Solid Freeform Fabrication Symposium,
Austin, TX, USA, August 5-8, 2007.
125. Nair, K., Yan, K. and Sun, W., “Quantitative Modeling and
Characterization of Hydrogel based 3D Tissue Scaffolds”, 2007
Flexible Automation & Intelligent Manufacturing
International Conference (FAIM2007), Philadelphia, PA, USA,
June 16-18, 2007.
126. Yildirim, E., Yin, X., Guceri, S. and Sun, W., “Three
Dimensional Composite Alginate/Carbon Nanotube Tissue
Scaffolds Printed via Multi-Nozzle Deposition System”, 2007
Flexible Automation & Intelligent Manufacturing
International Conference (FAIM2007), Philadelphia, PA, USA,
June 16-18, 2007.
127. Vondran, J., Sun, W. and Schauer, C., “Electrospanning
Nanofiber for Tissue Scaffolds”, 2007 Flexible Automation
& Intelligent Manufacturing International Conference
(FAIM2007), Philadelphia, PA, USA, June 16-18, 2007.
128. Chang, R., Jae, N. and Sun, W., “Freeform Bio-deposition
of Hepatocellular Tissue Constructs as an In Vitro
Physiological Model”, 2007 Flexible Automation &
Intelligent Manufacturing International Conference (FAIM2007),
Philadelphia, PA, USA, June 16-18, 2007.
129. Gomez, C., Shokoufandeh, A. and Sun, W., “A Volumetric
Steiner Tree Based Design Approach for 3D Tissue Scaffolds”,
TERMIS North America 2007 Conference and Exposition, Westin
Harbour Castle, Toronto, Canada, June 13-16, 2007.
130. Chang, R., Nam, J., Culbertson C., Holtorf, H.,
Jeevarajan, A. and Sun, W., “Bio-printing and Modeling of Flow
Patterns for Cell Encapsulated 3D Liver Chambers For
Pharmacokinetic Study”, TERMIS North America 2007 Conference
and Exposition, Westin Harbour Castle, Toronto, Canada, June
13-16, 2007.
131. Shor, L., Guceri, S., Wen, X. and Sun, W., “Osteoblast
Response to Composite Polycaprolactone/Hydroxyapatite Tissue
Scaffolds”, TERMIS North America 2007 Conference and
Exposition, Westin Harbour Castle, Toronto, Canada, June
13-16, 2007.
132. Nair, K., Yan, K. and Sun, W., “Multi-scale Computational
Modeling and Characterization of Cell Encapsulated Alginate
Tissue Constructs”, TERMIS North America 2007 Conference and
Exposition, Westin Harbour Castle, Toronto, Canada, June
13-16, 2007.
133. Yildirim, E., Ayan, H., Vasilets, V., Fridman, F.,
Guceri, S. and Sun, W., “Enhancement of Early-Time Points
Osteoblastic Adhesion on Poly (e-Caprolactone) Scaffolds
through Surface Plasma Treatment”, TERMIS North America 2007
Conference and Exposition, Westin Harbour Castle, Toronto,
Canada, June 13-16, 2007.
134. Li, J., Regli, W. and Sun, W., “A Mathematical Modeling
for Representation of Physiological Vascular Network
Integrated with Tissue Scaffolds”, TERMIS North America 2007
Conference and Exposition, Westin Harbour Castle, Toronto,
Canada, June 13-16, 2007.
135. Li, J., Regli, W. and Sun, W., “Mathematical
Representation of the Vascular Structure and Applications”,
2007 ACM Symposium on Solid and Physical Modeling, Beijing,
China, June 4-6, 2007.
136. Nair, K., Yan, K. and Sun, W., “A Multi Level
Computational Modeling for Quantifying Cell Deformation in
Encapsulated Alginate Structures”, CompMed 2007, Montreal,
Quebec, Canada, May 16-18, 2007.
137. Vondran, J., Sun, W. and Schauer, C., “Mechanical
Property Optimization of Electrospun Chitosan-PEO Nanofibers”,
American Chemical Society Middle Atlantic Regional Meeting,
Collegeville, PA, USA, May 16-18, 2007.
138. Karande, T, Sun, W, Dean, D. and Agrawal, M., “Effect of
Scaffold Architecture and Time on Cell Viability in the
Interior of Tissue Engineering Construct”, Society For
Biomaterials (SFB) - 2007 Annual Meeting, Chicago, IL, USA,
April 18-21, 2007.
139. Chang, R., Nam, J., Culbertson C., Holtorf, H.,
Jeevarajan, A. and Sun, W ., “Computer-Aided Freeform
Bioprinting of 3D Tissue Constructs for Pharmacokinetic
Study”, the 3rd International Symposium on Bioprinting and
Biofabrication 2006, Kawasaki, Japan, November 21-22, 2006.
140. Vondran, J., Sun, W. and Schauer, C., “Preparation of
Electrospun Chitosan-PEO Nanofibers”, Biomedical Engineering
Society 2006 Annual Meeting, Chicago, IL, USA, October 11-13,
2006.
141. Karande, T, Sun, W, Dean, D. and Agrawal, M., “Evaluating
Osteoblast Viability as a Function of Depth in Tissue
Engineering Constructs”, Biomedical Engineering Society 2006
Annual Meeting, Chicago, IL, USA, October 11-13, 2006.
142. Starly, B., Chang, R. and Sun, W., “Fabrication of
Poly-Ethylene Glycol Hydrogels Encapsulated with Hepatocytes
using UV-Photolithography”, Proceedings of 17th Solid Freeform
Fabrication Symposium, Austin, TX, USA, August 14-16, 2006.
143. Shor, L., Guceri, S. and Sun, W., “Precision Extrusion
Deposition of Composite Scaffolds”, Proceedings of 17th Solid
Freeform Fabrication Symposium, Austin, TX, USA, Aug. 14-16,
2006.
144. Yildirim, E., Yin, X., Guceri, S. and Sun, W.,
“Multi-Nozzle Deposition for Three Dimensional Printing of
Composite Alginate/Carbon Nanotube Tissue Scaffolds”,
Proceedings of 17th Solid Freeform Fabrication Symposium,
Austin, TX, USA, Aug. 14-16, 2006.
145. Gomez, C., Starly, B., Shokoufandeh, A. and Sun, W.,
“Transferring Optimized Unit Cell Based Tissue Scaffold
Designs to a Freeform Fabrication System”, Proceedings of 17th
Solid Freeform Fabrication Symposium, Austin, TX, USA, August
14-16, 2006.
146. Chang, R., Starly, B. and Sun, W., “Freeform Bioprinting
of Liver Encapsulated in Alginate Hydrogels Tissue Constructs
for Pharmacokinetic Study”, Proceedings of 17th Solid Freeform
Fabrication Symposium, Austin, TX, USA, August 14-16, 2006.
147. Sun, W., Shokoufandeh, A. and Liberschner, M.,
“Computer-Aided Tissue Engineering”, Proceedings of 2006 NSF
Design, Service, and Manufacturing Grantees and Research
Conference, St. Louis, Missouri, July 24-27, 2006.
148. Nair, K. and Sun, W., “Characterization and Numerical
Modeling of Alginate based Cell Encapsulated Matrices”,
Proceedings of World Congress on Tissue Engineering and
Regenerative Medicine, Pittsburgh, PA, USA, April 24-27, 2006.
149. Starly, B., Chang, R., Sun, W., Culbertson, C., Holtorf,
H. and Gonda, S., “Bioprinted Tissue-on-chip Application for
Pharmacokinetic Studies”, Proceedings of World Congress on
Tissue Engineering and Regenerative Medicine, Pittsburgh, PA,
USA, April 24-27, 2006.
150. Yildirim, E., Yin, X., Guceri, S., Ko, F. and Sun, W.,
“Process and Cytocompatibility of 3D Hybrid Alginate/Carbon
Nanotube Tissue Scaffolds”, Proceedings of World Congress on
Tissue Engineering and Regenerative Medicine, Pittsburgh, PA,
USA, April 24-27, 2006.
151. Shor, L., Guceri, S. and Sun, W., “Polycaprolactone and
Composite Polycaprolactone/ Hydroxyapatite Scaffolds for Bone
Tissue Engineering”, Proceedings of World Congress on Tissue
Engineering and Regenerative Medicine, Pittsburgh, PA, USA,
April 24-27, 2006.
152. Zhou, X., Gomez, C., Denton, T., Shokoufandeh, A. and
Sun, W., “Data support for unit cell base tissue scaffold
design, analysis and manufacture”, Proceedings of 2006 IEEE
Northeast Bioengineering Conference, Lafayette College,
Easton, PA, April 1-2, 2006.
153. Gomez, C., Denton, T., Shokoufandeh, A. and Sun, W.,
“Multi-Parameter Optimization for Two-Phase Unit-Cell based
Tissue Scaffolds”, Proceedings of 2006 IEEE Northeast
Bioengineering Conference, Lafayette College, Easton, PA,
April 1-2, 2006.
154. Yildirim, E., Yin, X., Ko, F., Guceri, S. and Sun, W,
“Evaluation of 3D Hybrid Alginate/Single Wall Carbon Nanotube
Tissue Scaffolds in Terms of Process and Cytocompatibility”,
Proceedings of 2006 IEEE Northeast Bioengineering Conference,
Lafayette College, Easton, PA, April 1-2, 2006.
155. Shor, L., Gordon, J., An, Y., Güçeri, S. and Sun, W.,
“Precision Extruding Deposition of Polycaprolactone and
Composite Polycaprolactone/Hydroxyapatite Scaffolds for Tissue
Engineering”, Proceedings of 2006 IEEE Northeast
Bioengineering Conference, Lafayette College, Easton, PA,
April 1-2, 2006.
156. Vondran, J., Rodriguez, M., Schauer, C. and Sun, W.,
“Preparation of Electrospun Chitosan-PEO Fibers”, Proceedings
of 2006 IEEE Northeast Bioengineering Conference, Lafayette
College, Easton, PA, April 1-2, 2006.
157. Evans, P. and Sun, W., “Finite Element Analysis and
Computer Aided Tissue Engineering Design of a Replacement
Lumbar Intervertebral Disc”, Proceedings of 2006 IEEE
Northeast Bioengineering Conference, Lafayette College,
Easton, PA, April 1-2, 2006.
158. Chang, R., Starly, B., Culbertson, C., Holtorf, H.,
Gonda, S. and Sun, W., “Development of an in vitro Micro-organ
Model for Pharmacokinetic Microanalysis”, Proceedings of 2006
IEEE Northeast Bioengineering Conference, Lafayette College,
Easton, PA, April 1-2, 2006.
159. Nair, K. and Sun, W., “Numerical Model for Predicting
Mechanical Properties of Cell Encapsulated Hydrogel
Scaffolds”, Proceedings of 2006 IEEE Northeast Bioengineering
Conference, Lafayette College, Easton, PA, April 1-2, 2006.
160. Evans, P. and Sun, W., “Novel Design on an Intervertebral
Disc Replacement Utilizing Finite Element Methods”,
Proceedings of 14th Annual Symposium on Computational Methods
in Orthopaedic Biomechanics, Chicago, IL, March 18, 2006.
161. Khalil, S. and Sun, W., “Bioactive Fabrication of Tissue
Engineered Sacffolds”, Proceedings of Advances in
Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November
5-11, 2005.
162. Starly, B., Shor, L., Guceri, S. and Sun, W., “Space
Filling Curves: Its Design and Fabrication for Extrusion Based
SFF Systems”, Proceedings of Advances in Bio-Manufacturing,
ASME IMECE 2005, Orlando, FL, November 5-11, 2005.
163. Wettergreen, M., Bucklen B., Starly B., Yuksel E., Sun W.
and Liebschner, M., "Unit Block Library of Basic Architectures
for Use in Computer-Aided Tissue Engineering of Bone
Replacement Scaffolds." Proceedings of Advances in
Bio-Manufacturing, ASME IMECE 2005, Orlando, FL, November
5-11, 2005.
164. Wettergreen, M., Bucklen B., Sun W. and Liebschner, M.,
"Computer-Aided Tissue Engineering in Whole Bone Replacement
Treatment." Proceedings of Advances in Bio-Manufacturing, ASME
IMECE 2005, Orlando, FL, November 5-11, 2005.
165. Williams, R., Huang, Y, Melkote, S., Kinsey, B., Sun, W.
and Yao, D., “Recent Advances in Micro/Meso-Scale
Manufacturing Process”, Proceedings of IMECE2005, 2005 ASME
International Mechanical Engineering Congress and Exposition,
Orlando, Florida USA, November 5-11, 2005.
166. Dutta, D., Stone, J., Sun, W., Cho, E., Lockett, S.,
Wang, F. and Henderson, L., “Osteoblast Adhesion on Tissue
Engineering Scaffolds Made by Bio-Manufacturing Techniques”,
Proceedings of IMECE2005 (ASME-IMECE2005-82472), 2005 ASME
International Mechanical Engineering Congress and Exposition,
Orlando, Florida USA, November 5-11, 2005.
167. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings
of World Congress on Tissue Engineering and Regenerative
Medicine, Shanghai, China, Oct. 20-25, 2005.
168. Sun, W., “Biopolymer Deposition for Freeform Fabrication
of Hydrogel Tissue Constructs”, Proceedings of MS&T '05
ASM International Conference, Pittsburgh, PA, USA, September
25-28, 2005.
169. Sun, W., “Freeform Fabrication of 3D Tissue Scaffolds”,
Proceedings of MS&T '05 ASM International Conference,
Pittsburgh, PA, USA, September 25-28, 2005.
170. Li, J., Regli, W. and Sun, W., “Swept Volume
Representation of Material Deposition Process for Tissue
Scaffold Fabrication”, Proceedings of ASME 2005 Design
Engineering Technical Conference, Long Beach, California, USA,
September 24-28, 2005.
171. Sun, W., “Computer-Aided Tissue Engineering and Its
Application For Freeform Fabrication of Tissue Substitutes”,
Proceedings of DigiFab 2005 - the International Conference on
Digital Fabrication, Baltimore, MD, USA, September 19, 2005.
172. Fang, Z., Sun, W. and Tzeng, J., “A Homogenization Theory
for Composites with Time-Dependent Elastic-Viscoplastic
Behavior”, the 20th American Society of Composites Technical
Conference, Philadelphia, PA, USA, September 7-9, 2005.
173. Li, J., Regli, W. and Sun, W., “A Case Study of Swept
Volume Representation of Tissue Scaffolds”, Proceedings of
2005 IEEE Northeastern Bioengineering Conference, Stevens
Institute of Technology, New Jersey, USA, April 2-3, 2005.
174. Demirci, M., Gomez, C., Shokoufandeh, A. and Sun, W.,
“Connectivity for Mass and Fluid Transport in
Three-Dimensional Two-Phase Structures”, Proceedings of 2005
IEEE Northeastern Bioengineering Conference, Stevens Institute
of Technology, New Jersey, USA, April 2-3, 2005.
175. Gomez, C., Demirci,, M., Sun, W. and Shokoufandeh, A.,
“Unit Cell Analysis and Characterization of Three-Dimensional
Two-Phase Tissue Scaffolds”, Proceedings of 2005 IEEE
Northeastern Bioengineering Conference, Stevens Institute of
Technology, New Jersey, USA, April 2-3, 2005.
176. Nair, K. and Sun, W., “Preliminary Study of Viscoelastic
Bulk Properties for Cell-Substrate Interaction in Scaffold
Guided Tissue”, Proceedings of 2005 IEEE Northeastern
Bioengineering Conference, Stevens Institute of Technology,
New Jersey, USA, April 2-3, 2005.
177. Zhou, X., Fang, Z. and Sun, W., “Numerical computation of
the homogenized effective tissue scaffold property”,
Proceedings of 2005 IEEE Northeastern Bioengineering
Conference, Stevens Institute of Technology, New Jersey, USA,
April 2-3, 2005.
178. Evans, P., Starly, B. and Sun, W., “Computer Aided Tissue
Engineering Design for a Spinal Intervertebral Disc”,
Proceedings of 2005 IEEE Northeastern Bioengineering
Conference, Stevens Institute of Technology, New Jersey, USA,
April 2-3, 2005.
179. Khalil, K., Nam, J. and Sun, W., “Freeform Fabrication of
Bioactive Tissue Scaffolds”, Proceedings of 2005 IEEE
Northeastern Bioengineering Conference, Stevens Institute of
Technology, New Jersey, USA, April 2-3, 2005.
180. Starly, B., Shor, L., Fang, Z. and Sun, W., “Design and
Freeform Fabrication of Load Bearing Tissue Scaffolds”,
Proceedings of 2005 IEEE Northeastern Bioengineering
Conference, Stevens Institute of Technology, New Jersey, USA,
April 2-3, 2005.
181. Shor, L., Darling, A., Starly, B., Sun, W. and Gureci,
S., “Precision Extruding Deposition of Composite
Polycaprolactone/Hydroxyapatite Scaffolds for Bone Tissue
Engineering”, Proceedings of 2005 IEEE Northeastern
Bioengineering Conference, Stevens Institute of Technology,
New Jersey, USA, April 2-3, 2005.
182. Fang, Z. and Sun, W., “Image-guided Multi-scale
Statistical Model to Mimic Random Bone Structure”, Proceedings
of 2005 IEEE Northeastern Bioengineering Conference, Stevens
Institute of Technology, New Jersey, USA, April 2-3, 2005.
183. Piatt, J., Starly, B., Faerber, E. and Sun, W., “Image
Guided Craniofacial Reconstructive Surgery”, Proceedings of
Advanced Digital Technology in Head and Neck Reconstruction,
Edmonton, Alberta, Canada, March 10-13, 2005.
184. Sun, W., “Computer-Aided Tissue Engineering”, Proceedings
of the 2nd International Workshop on Bioprinting,
Biopatterning and Bioassembly, Medical University of South
Carolina, Charleston, SC, USA, March 14-15, 2005.
185. Starly, B., Fang, Z., Khalil, S., Shor, L. and Sun, W.,
“Biomimetic Design and Fabrication of Tissue scaffolds”,
Proceed. of the 2nd International Workshop on Bioprinting,
Biopatterning and Bioassembly, Medical University of South
Carolina, Charleston, SC, USA, March 14-15, 2005.
186. Wettergreen, M., Sun W., Mikos A. and Liebschner M,
"Geometric Characterization of Scaffold Building Blocks for
Tissue Engineering." Proceedings of Transcript, Orthopaedic
Research Society (ORS), Washington, D.C., USA, February 20 -
23, 2005.
187. Sun, W., “Computer-Aided Tissue Engineering: Recent
Advances”, Proceedings of International Symposium on
Micro/Nano Thermal and Fluids Systems, the University of
Tokyo, Tokyo, Japan, December 6-7, 2004.
188. Sun, W., Shokoufandeh, A. and Regli, W., “Representation
and Design Heterogeneous Structures”, Proceedings of 2005 NSF
Grantee Research Conference, Phoenix, AZ, USA, January 3-5,
2005.
189. Shor, L., Darling, A., Sun, W. and Guceri, S., ”
Precision Extruding Deposition and Characterization of
Cellular Poly-e-Caprolactone Tissue Scaffolds”, Proceedings of
2004 MRS Fall Meeting, Hynes Convention Center, Boston, MA,
USA, Nov. 29-Dec. 02, 2004.
190. Sun, W., “Solid Freeform Fabrication in Computer-Aided
Tissue Engineering”, Proceedings of Symposium on Frontiers of
Materials Science and Engineering 2004: Bridging Science and
Manufacturing, 2004 ASM Materials Solutions Conference &
Exposition, Columbus, Ohio, USA, October 18-21 2004.
191. Fang, F., Sun, W. and Tzeng, J., “Asymptotic
Homogenization Model for Prediction of Effective Properties of
Composite and Heterogeneous Structures”, Proceedings of the
American Society for Composites 19th Technical Conference,
Georgia Technical Institute, Atlanta, Georgia, October 17-20,
2004.
192. Gomez, C., Demirci, M., Shokoufandeh, A., Sun, W. and
Regli, W., “Two-Phase Structure Representation and Design:
Tissue Engineered 3-D Construct Connectivity Study”,
Proceedings of the 2004 Biomedical Engineering Society Annual
Fall Meeting, Pennsylvania Convention Center, Philadelphia,
PA, USA, October 13-16, 2004.
193. Khalil, S., Nam, J., Darling, A. and Sun, W., “Freeform
Fabrication of Tissue Scaffolds via Biopolymer Deposition”,
Proceedings of the 2004 Biomedical Engineering Society Annual
Fall Meeting, Pennsylvania Convention Center, Philadelphia,
PA, USA, October 13-16, 2004.
194. Starly, B., Sun, W., Lau, A., Lau, W. and Bradbury, T.,
“Biomimetic Design and Fabrication of Tissue scaffolds”,
Proceedings of the 2004 Biomedical Engineering Society Annual
Fall Meeting, Pennsylvania Convention Center, Philadelphia,
PA, USA, October 13-16, 2004.
195. Sun, W., “On Computer-Aided Tissue Engineering”,
Proceedings of the 2nd World Congress for Biomedical
Engineers, Beijing, China, September 27-29, 2004.
196. Darling, A., Nam, J., Sun, W., “Hybrid Polymer Scaffolds
for Tissue Engineering”, Proceedings of the Polymer Networks
2004 Conference (NIH/NICHD), Natcher Conference Center, NIH,
Bethesda, MD, USA, August 16-18, 2004.
197. Khalil, S., Nam, J. and Sun, W., “Biopolymer Deposition
for Freeform fabrication of Tissue Scaffolds”, Proceedings of
the Polymer Networks 2004 Conference (NIH/NICHD), Natcher
Conference Center, NIH, Bethesda, MD, USA, August 16-18, 2004.
198. Starly, B., Sun, W., Lau, A., Lau, W. and Bradbury, T.,
“Biomimetic Design and Fabrication of Interior Architecture of
Tissue scaffolds using Solid Freeform Fabrication,”
Proceedings of 15th Solid Freeform Fabrication Symposium,
Austin, TX, USA, August 3-5, 2004.
199. Khalil, S., Nam, J., Darling, A. and Sun, W.,
“Multi-nozzle Biopolymer Deposition for Freeform Fabrication
of Tissue Construct,” Proceedings of 15th Solid Freeform
Fabrication Symposium, Austin, TX, USA, August 3-5, 2004.
200. Darling, A., Mondrinos, M., Sun, W. and Lelkes, P.,
“Strategies for Heterogeneous Material/Architecture Tissue
Scaffolds”, Proceedings of International Conference
"Strategies in Tissue Engineering", Würzburg, Germany, June
17-19, 2004.
201. Starly, B., Darling, A., Gomez, C., Sun, W.,
Shokoufandeh, A. and Regli, W., “Image Based Bio-CAD Modeling
and Its Application in Biomedical and Tissue Engineering”,
Proceedings of ACM Symposium on Solid Modeling and
Applications 04, Genova, Italy, June 9-11, 2004.
202. Khalil, S., Nam J. and Sun, W., “Biopolymer Deposition
for Freeform Fabrication of Tissue Engineered Scaffolds”,
Proceedings of the 30th IEEE Annual Northeast Bioengineering
Conference, Western New England College, Springfield, MA, USA,
April 17-18, 2004.
203. Gomez, C., Demirci, M., Shokoufandeh, A., Sun, W. and
Regli, W., “Tissue Engineered Constructs: Connectivity Study
for Three Dimensional Two-Phase Structures”, Proceedings of
the 30th IEEE Annual Northeast Bioengineering Conference,
Western New England College, Springfield, MA, USA, April
17-18, 2004.
204. Darling, A., Khalil, S., Nam, J. and Sun, W.,
“Heterogeneous Material Strategies for Tissue Scaffold
Manufacture”, Proceedings of the 30th IEEE Annual Northeast
Bioengineering Conference, Western New England College,
Springfield, MA, USA, April 17-18, 2004.
205. Darling, A., Sun, W. and Kriete, A., “Scaffold
Informatics: Tissue Scaffolds Based on 3D Image Data”,
Proceedings of Focus On Microscopy International Conference
2004, Philadelphia, PA, USA, April 4-5, 2004.
206. Khalil, S., Nam J., Darling, A. and Sun, W.,
“Multi-nozzle Biopolymer Deposition and Freeform Fabrication
of Tissue Scaffolds”, Proceedings of the14th Interdisciplinary
Research Conference on Biomaterials, D. Bernache-Assollant and
E. Champion (Editors), Sauramps Medical Publisher, pp. 77-84,
Limoges, France, March 25-26, 2004.
207. Schroeder, C., Bespalov, D., Fang, Z., Shokoufandeh, A.,
Regli, W., Lutz, E. and Sun, W., “Representation and Design of
Heterogeneous Structures: Porosity Representation, Feature
Decomposition, and Asymptotic Homogenization”, Proceedings of
2004 NSF Design, Service and Manufacturing Grantees and
Research Conference, Dallas, TX, USA, Jan. 6-8, 2004.
208. Gomez, C., Demirci, M., Shokoufandeh, A., Regli, W. and
Sun, W., “Representation and Design of Heterogeneous
Structures: Connectivity Study for 3D Tissue Engineered
Constructs”, Proceedings of 2004 NSF Design, Service and
Manufacturing Grantees and Research Conference, Dallas, TX,
USA, Jan. 6-8, 2004.
209. Sun, W., Nam, J., Khalil, S. and Darling, A.,
“Multi-nozzle Biopolymer Deposition for Tissue Engineering
Application”, Proceedings of the 6th International Conference
on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
210. Nam, J., Darling, A., Starly, B., Fang, Z., Gomez, C.,
Khalil, S. and Sun, W., “On Computer-Aided Tissue
Engineering”, Proceedings of the 6th International Conference
on Tissue Engineering, Orlando, FL, USA, Dec. 10-13, 2003.
211. Fang, Z., Gomez, C. and Sun, W., “Modeling and
Homogenization of Mechanical Properties of Polymer-based
Tissue Scaffold Under Biodegradation”, Proceedings of the 6th
International Conference on Tissue Engineering, Orlando, FL,
USA, Dec. 10-13, 2003.
212. Starly, B., Gomez, C. and Sun, W., “Biomimetic Modeling
and Design of 3D Bone Scaffolds”, Proceedings of the 6th
International Conference on Tissue Engineering, Orlando, FL,
USA, Dec. 10-13, 2003.
213. Darling, A. and Sun, W., “Bio-blueprint Modeling for 3D
Tissue and Organ Printing”, Proceedings of the 6th
International Conference on Tissue Engineering, Orlando, FL,
USA, Dec. 10-13, 2003.
214. Darling, A., Nam, J. and Sun, W., “Scaffold Informatics:
A bioinformatics Approach for Tissue Scaffold Modeling and
Construction,” Proceedings of Symposium on Digital Biology:
The Emerging Paradigm, NIH Biomedical Information Science and
Technology Initiative Consortium, Natcher Conference Center,
NIH, Bethesda, MD, USA, November 6-7, 2003.
215. Blackmore, D., Leu, M., Regli, W. and Sun, W.,
“Applications of Computational Topology of Swept Volumes”,
Proceedings of DIMACS Workshop on Computer Aided Design and
Manufacturing, Rutgers University, New Brunswick, NJ, USA,
October 7-9, 2003.
216. Schroeder, C., Regli, W., Shokoufandeh A. and Sun, W.,
“Stochastic Geometry for Bio-Medical CAD”, Proceedings of
DIMACS Workshop on Computer Aided Design and Manufacturing,
Rutgers University, New Brunswick, NJ, USA, October 7-9, 2003.
217. Bespalov, D., Shokoufandeh, A., Regli, W. and Sun, W.,
“Scale-space representations and their application to 3D
matching of solid models”, Proceedings of DIMACS Workshop on
Computer Aided Design and Manufacturing, Rutgers University,
New Brunswick, NJ, USA, Oct. 7-9, 2003.
218. Darling, A. and Sun, W., “3D Microtomographic
Characterization of Precision Fused Deposited Biocompatible
Polymer Scaffolds", Proceedings of 25th Annual International
Conference of the IEEE Engineering in Medicine and Biology
Society, Cancun, Mexico, September 17-21, 2003.
219. Wang, F., Shor, L., Darling, A., Khalil, S., Starly, B.,
Güçeri, S. and Sun, W., “Fabrication and Characterization of
Cellualr Poly-e-Caprolactone (PCL) Scaffolds,” Proceedings of
14th Solid Freeform Fabrication Symposium, Austin, TX, USA,
August 4-6, 2003.
220. Starly, B., Lau, A., Sun, W., Lau, W., Bradbury, T.,
Youssef, A. and Gaylo, C., “Direct Slicing of STEP Based NURBS
Models for Solid Freeform Fabrication,” Proceedings of the
14th Solid Freeform Fabrication Symposium, Austin, TX, USA,
August 4-6, 2003.
221. Fang, Z., Sun, W. and Tzeng, J., “Asymptotic
Homogenization for Effective Mechanical Properties of Electric
Composite Conductors,” Proceedings of the 14th International
Conference on Composite Materials, San Diego, CA, USA, July
14-18, 2003.
222. Tzeng, J. and Sun, W., “Constitutive Modeling of
Electrical Composite Conductor by Finite Element Method,”
Proceedings of the 14th International Conference on Composite
Materials, San Diego, CA, USA, July 14-18, 2003.
223. Sun, W., “Biomimetic modeling and its application in
computer-aided tissue engineering,” Proceedings of the 3rd
International Conference on Photonics and Imaging in Biology
and Medicine, Wuhan, China, June 8-11, 2003.
224. Schroeder, C., Regli, W., Shokoufandeh, A. and Sun, W.,
"Representation of Porous Artifacts for Bio-Medical
Applications", Proceedings of the 8th ACM Symposium on Solid
Modeling and Applications, Seattle, Washington, USA, June 6-8,
2003, pp. 254-257.
225. Bespalov, D., Shokoufandeh, A., Regli, W. and Sun, W.,
"Scale-Space Representation of 3D Models and Topological
Matching", Proceedings of the 8th ACM/SIGGRAPH Symp. on Solid
Modeling and Applications, Seattle, Washington, USA, June 6-8,
2003, pp. 208-215.
226. Darling, A., Shor, L., Khalil, S., Wang, F., Güçeri, S.
and Sun, W., “Micro-ct Characterization of Fusing Extruded PCL
Scaffolds,” Proceeding of 29th IEEE Annual Northeastern
Bioengineering Conference, NJIT, Newark, NJ, USA, March 23-24,
2003.
227. Wang, F., Shor, L., Starly, B., Darling, A., Güçeri, S.
and Sun, W., “Fabrication of Cellular Poly-Є-Caprolactone
(PCL) Scaffolds by Precision Extruding Deposition Process,”
Proceeding of 29th IEEE Annual Northeastern Bioengineering
Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
228. Starly, B., Gomez, C., Darling, A., Fang, Z., Lau, A.,
Sun, W., Lau, W., Bradbury, T., Youssef, A. and Gaylo, C.,
“Computer-Aided Bone Scaffold Design – A Biomimetic Approach,”
Proceeding of 29th IEEE Annual Northeastern Bioengineering
Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
229. Yan, C., Starly, B., Gomez, C., Fang, Z. and Sun, W., “On
Effective Properties of Heterogeneous Bone Scaffolds”
Proceeding of 29th IEEE Annual Northeastern Bioengineering
Conference, NJIT, Newark, NJ, USA, March 23-24, 2003.
230. Fang, Z., Yan, C., Sun, W., Shokoufandeh, A. and Regli,
W., “Asymptotic Homogenization Based Process for
Characterization of Tissue Scaffolds,” Proceeding of 29th IEEE
Annual Northeastern Bioengineering Conference, NJIT, Newark,
NJ, USA, March 23-24, 2003.
231. Gomez, C., Starly, B., Darling, A., Fang, Z., Lau, A. and
Sun, W., “Biomimetic modeling and design of bone scaffold”,
Proceeding of the 13th Interdisciplinary Research Conference
on Biomaterials, Baltimore, MD, USA, March 14-15, 2003.
232. Darling, A., Starly, B., Gomez, C., Fang, Z. and Sun, W.,
“Image-based biomimetic modeling and its application in
computer-aided tissue engineering”, Proceeding of SPIE/BIOS
2003 – Symposium on optical technologies to solve problems in
tissue engineering and tissue mechanics, San Jose, CA, USA,
Jan. 25-31, 2003.
233. Sun, W., Shokoufandeh, A. and Regli, W., “Representation
and design of heterogeneous structures”, Proceedings of 2003
NSF Design, Service and Manufacturing Grantees and Research
Conference, Brimingham, Alabama, USA. Jan. 7-9, 2003.
234. Sun, W., Shokoufandeh, A. and Regli, W., “Representation
and design of heterogeneous tissue structures”, Proceedings of
2002 meeting on Tissue Engineering at Cold Spring Harbor
Laboratory, Cold Spring Harbor, New York, USA, November 21~24,
2002, pp. 27.
235. Starly, B., Darling, A. and Sun, W., “Biomimetic design
of 3D bone scaffolds”, Proceedings of 2002 meeting on Tissue
Engineering at Cold Spring Harbor Laboratory, Cold Spring
Harbor, New York, USA, November 21~24, 2002, pp. 45.
236. Sun, W, and Tzeng, T., “An Analytical Modeling for
Effective Mechanical Properties of Multi-phase Composite
Conductor”, Proceedings of 34th International SAMPE,
Baltimore, MD, USA, November, 2002, pp. 597-602.
237. Gomez, C., Starly, B., Darling, A., Fang, Z., Lau, A.,
Sun, W., Lau, W., Bradbury, T. and Gaylo, C., “Biomimetic
Modeling and Design of Bone Scaffolds”, Proceedings of the 6th
New Jersey Biomaterial Symposium, Somerset, NJ, USA, October
17-18, 2002.
238. Sun, W., Starly, B., Lau, A., Lau, W., Lim, D., Seliktar,
R., Youssef, A., Bradbury, T. and Gaylo, C., “Computer-Aided
Design Modeling for Heterogeneous Bone Structure”, Proceedings
of the American Society for Composites 17th Technical
Conference, Purdue University, IN, USA, October 12-15, 2002,
pp. 144-153.
239. Sun, W., and Tzeng, J., “Homogenization Modeling for
Mechanical Properties of Composite Conductor with Cooling
Channel,” Proceedings of the American Society for Composites
17th Technical Conference, Purdue University, IN, USA, October
12-15, 2002.
240. Starly, B., Sun, W., Lau, W. and Fang, Z., “Biomimetic”
Model for Heterogeneous Bone Scaffold” Biomedical Engineering:
Recent Developments: Editor, J. Vossoughi, 2002 Medical and
Engineering Publishers, Inc., Sept., 2002, pp. 305-306.
241. Darling, A., Sun, W. and Subbaraman, G., “BioModeling
Assisted Three-Dimensional Organ Printing”, Biomedical
Engineering: Recent Developments: Editor, J. Vossoughi, 2002
Medical and Engineering Publishers, Inc., Sept., 2002, pp.
237-238.
242. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L.
“Finite element modeling of the shoulder complex using the
data obtained from musculo-skeletal model and computerized
tomography,” Biomedical Engineering: Recent Developments:
Editor, J. Vossoughi, 2002 Medical and Engineering Publishers,
Inc., Sept., 2002, pp. 73-74.
243. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L,
“Potential Diagnostic Applications of a Finite Element Model
for Glenohumeral Pathology,” Proceedings of the Annual
Orthopedic Society Research Conference, New Oreland, LA, USA,
Sept. 2002.
244. Starly, B., Sun, W., Lau, W. and Nam, J., “Layered
Composite Model for Design and Fabrication of Bone
Replacement”, Proceedings of 13rd Solid Freeform Fabrication
Symposium, Austin, TX, August 5-8, 2002, pp. 24-34.
245. Lau, W., Bradbury, T., Youssef, A., Gaylo, C., Sun, W.
and Lau, A., “XML Representation and Process Algorithm for
Layered Manufacturing of Heterogeneous Objects”, Proceedings
of 13rd Solid Freeform Fabrication Symposium, Austin, TX,
August 5-8, 2002, pp. 255-266.
246. Lim, D., Seliktar, R., Holman, J., Sun, W. and Nunes, L,
“FE Modeling of the Shoulder Using Mechanical Properties
Obtained from CT Numbers,” Proceedings of the Fourth World
Congress of Biomechanics, Calgary, Alberta, Canada, August
4-9, 2002.
247. Dcosta, D., Lin, F., Sun, W. and EI-Raghy, T.,
“Integrated Fabrication Process and Layered Manufacturing of
Fully Dense Ti3SiC2 Powder-Based Structures” Proceedings of
the 2nd International Conference on Rapid Prototyping and
Manufacturing, Beijing, China, August 10-13, 2002.
248. Nam, J., Dimovski, S., Lin, F. and Sun, W., “Rapid
Prototyping Assisted Medical Modeling” Proceedings of the 2nd
International Conference on Rapid Prototyping and
Manufacturing, Beijing, China, August 10-13, 2002.
249. Sun, W. and Tzeng, J., “Effective Mechanical Modeling of
Composite Conductor”, Proceedings of 14th US National Congress
of Applied Mechanics, Blacksburg, VA, June 13-15, 2002.
250. Laurencin, C., Attawia, M., Khan, Y., Marcolongo, M., Ko,
F. and Sun, W., “Towards an International Tissue Engineering
Curriculum: The Drexel Initiative,” Proceedings of the 2002
American Society for Engineering Education Annual Conference
& Exposition, American Society for Engineering Education,
Montreal, Canada, June 22-24, 2002.
251. Dcosta, D., Hu, X., Chiang, J., Lehmicke, M. and Sun, W.,
“CAD/CAE Assisted BioModeling and Design of Inter-Vertebral
Implant,” Proceedings of 28th IEEE Annual Northeastern
Bioengineering Conference, Philadelphia, PA, April 23-24,
2002, pp. 213-214.
252. Hu, X. and Sun, W., “A Unit Cell-Based Design for
Composite Application,” Proceedings of American Society of
Composite 16th Annual Technical Conference, Virginia
Polytechnic University, Blacksburg, VA, Sept. 10-13, 2001.
253. Hu, X. and Sun, W., “An Information Based Design Support
System for Composite Structures,” Proceedings of ASME 2001
Design for Manufacturing Conference, Pittsburgh, PA, Sept.
10-13, 2001.
254. Chiang, J., Lehmicke, M., Dcosta, D., Hu, X., Lin, F. and
Sun, W., “Rapid Prototyping Assisted Design and Development of
Inter-Vertebral Implants,” Proceedings of 12th Solid Freeform
Fabrication Symposium, Austin, TX, August 8-10, 2001.
255. Dcosta, D. Sun, W. and EI-Raghy, T., “Freeform
Fabrication of Ti3SiC2 Structures,” Proceedings of 12th Solid
Freeform Fabrication Symposium, Austin, TX, August 8-10, 2001.
256. Hu, X., Pang, J., Pang, Y., Atwood, M., Sun, W. and
Regli, W. “Design Rational: Representation, Capture, and
Retrieval,” Proceedings of 2000 ASME Design For Manufacturing
Technical Conference, Baltimore, Maryland, September 10-13,
2000.
257. Sun, W., Lin, F. and Hu, X., “Computer-Aided Composite
Unit Cell Design and Modeling,” Proceedings of American
Society of Composite 15th Annual Technical Conference, College
Station, TX, September 24-27, 2000.
258. Lin, F. and Sun, W., “Computer Modeling and Simulation of
Single Fiber Pull-out,” Proceedings of American Society of
Composite 15th Annual Technical Conference, College Station,
TX, September 24-27, 2000.
259. D’Costa, D., Dimovski, S., Lin, F., El-Raghy, A.,
Barsoum, M. and Sun, W., “Three-Dimensional Printing of
Layered Machinable Ductile Carbide,” Proceedings of Eleventh
Solid Freeform Fabrication Symposium, University of Texas,
Austin, TX, August 7-9, 2000.
260. Hu, X., Jiang, T., Lin., F. and Sun, W., “Reasoning
Boolean Operation for Modeling, Simulation and Freeform
Fabrication of Heterogeneous Objects,” Proceedings of Eleventh
Solid Freeform Fabrication Symposium, University of Texas
Austin, August 7-9, 2000.
261. Jiang, T., Lin, F., Kaltman, S. and Sun, W., “Anatomical
Modeling and Rapid Prototyping Assisted Surgical
Reconstruction,” Proceedings of the Eleventh Solid Freeform
Fabrication Symposium, University of Texas Austin, August 7-9,
2000.
262. Sun, W. and Kumar, P., “Knowledge Plus Expertise -
Engineering Education in Information Era,” Proceedings of
International Conference on Engineering Education, Beijing,
China, Nov. 3-5, 1999, Vol. II, pp. 1 - 9.
263. Sun, W. and Bennett, T., “Strategy and Technology
Infrastructure to Enhance Regional Manufacturing
Competitiveness,” Proceedings of the 5th International
Conference on Manufacturing Technology, Beijing, China, Oct.
31 – Nov. 3, 1999.
264. Lin, F., Sun, W. and Yan, Y., “Axiomatic Design Theory
Based Design Rules for Machatronics Products,” Proceedings of
the 5th International Conference on Manufacturing Technology,
Beijing, China, Oct. 31 – Nov. 3, 1999.
265. Lin, F., Sun, W. and Yan, Y., “A Mathematical Description
of Layered Manufacturing Fabrication,” Proceedings of the 10th
Solid Freeform Fabrication Symposium, Austin, TX, August 9-11,
1999, pp. 139 - 146.
266. Sun, W., “Beyond Solid Modeling – A Multi-volume CAD
Modeling for Heterogeneous Material Structures,” Proceedings
of the 98 International Conference on Computer-Aided Design,
Guilin, China, October 8 – October 11, 1998, pp. 116-125.
267. Sun, W. and Ko, F., “Computer-Aided Design and Simulation
for 3D Fabric Composite Armor,” Proceedings of the Fifth
International Conference on Composites Engineering, Las Vegas,
July 5-9, 1998, pp. 863 – 864.
268. Ko, F., Sun, W., Zavaliangos, A., Joulic, J. and
Aly-El-Shiek, "Integrated Design for Manufacturing of
Composite Helmet,” Proceedings of ADPA/NSIA Design and
Integration of Helmet System Symposium, Framingham, MA, USA,
December 3-5, 1997.
269. Sun, W. and Lau, A., "Design for Manufacturability and
Concurrent Engineering in Integrated Product Development
Process,” Proceedings of Concurrent Product Design and
Environmentally Conscious Manufacturing, Edited by S.B.
Billatos and H.C. Zhang, 1997 ASME Winter Annual Meeting,
Dallas, TX, pp. 113 – 124, Nov. 16 - 21, 1997.
270. Sun, W., Lau, A. and Ko, F., "Integrated Design for
Manufacturing of Composite Automotive Components,” Proceedings
of The Fourth International Conference of Composite
Engineering, Big Island, Hawaii, USA, July 6-12, 1997, pp. 953
- 954.
271. Sun, W. and Lau, A., "DFMA in Rapid Product Development,”
Proceedings of the International Forum on Product Design for
Manufacture and Assembly, Newport, RI, June 9-10, 1997, pp.
152 - 161.
272. Sun, W. and Lau, A., "A Knowledge-enriched CAD Modeling
and Solid Free-form Realization for Heterogeneous Material
Structures,” Proceedings of the Seventh International
Conference on Rapid Prototyping, San Francisco, CA, March 31 -
April 3, 1997, pp. 79 - 87.
273. Sun., W., "Modeling of Flexible Piezoelectric Laminates,"
Proceedings of SPIE 1993 North American Conference on Smart
Structures and Materials, Albuquerque, New Mexico, Feb. 1-4,
1993, Vol. 1917, pp. 497-507.
274. Sun, W., Khatri, S., Lau, A. and Koczak, M., "Nonlinear
Deformation Behavior of Thermoplastic Matrix Composites:
Graphite/PPS, Glass/PPS and Their Hybrid Laminates,"
Proceedings of the American Society for Composites 6th
Technical Conference, Albany, New York, Oct. 6-9, 1991, pp.
319-328.
275. Sun, W. and Lau, A., "An Incremental Elastic-Plastic
Model for Laminated Hybrid Matrix Composites," Proceedings of
the 1988 ASME Winter Annual Meeting, Symposium on Advanced
Composites and Processing Technology, T.H. Tsiang and R.A.
Taylor Ed., ASME, N.Y., 1988, pp. 55-63.
276. Sun, W. and Lau, A., "Ambient Temperature Constitutive
Relation of ARALL Hybrid-Matrix Composites," Proceedings of
the 1987 ASME Winter Annual meeting, Symposium on Constitutive
Modeling for Nontraditional Materials, V. Stokes and D.
Krajcipovic Ed., ASME, N.Y., 1987, pp. 147-159.